G3606 and G3608 Engines Caterpillar


Gear Group (Rear) - Remove and Install

Usage:

G3606 JFE

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
1P-0510  冲头总成 

开始:

  1. 卸下凸轮轴主动齿轮。

  2. 拆下后壳体。


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。




    图 1g03860598

  1. 拆下螺栓 (3) 和挡圈 (2)。

  2. 将适当的起吊设备连接至齿轮组件 (1)。 齿轮组件 (1) 的重量约为 57 kg (126 lb)

  3. 拆下齿轮组件 (1)。


    图 2g03860738

  4. 拆下螺栓 (4) 和齿轮 (5)。


    图 3g03861041

  5. 使用工具 (A) 和适当的压具,将轴承 (6) 从齿轮 (7) 上拆下。

安装步骤

  1. 按与拆卸相反的顺序安装齿轮组件 (1)。

Caterpillar Information System:

3512C Generator Set Engine Rocker Shaft and Pushrod - Install
794 AC Off-Highway Truck Field Assembly Brakes - Install
3512C Generator Set Engine Air Inlet Manifold - Remove and Install
2015/07/23 Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
C280-08 Tier 4 Engine Turbocharger - Assemble
3512C Generator Set Engine Fuel Pressure Sensor - Remove and Install
C3.4B Engines Component Location
C3.4B Engines General Information
349F and 352F Excavators Machine System Specifications Front Lines
C15 and C18 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter
XQ400 Power Module Coolant Level - Check
XQ400 Power Module Fan Drive Bearing - Lubricate
XQ400 Power Module Plate Locations and Film Locations
XQ400 Power Module Sensors and Electrical Components
Energy Storage System Rectifier Configuration
C280 Marine Engines Air Inlet and Exhaust System Operation - Aftertreatment
HPU300 Hydraulic Power Pack Transport Information
New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620} New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620}
349F and 352F Excavators Machine System Specifications Coupler Lines
349F and 352F Excavators Machine System Specifications Boom Lines
349F and 352F Excavators Machine System Specifications Coupler Lines
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.