Energy Storage System Caterpillar


Rectifier Configuration

Usage:

ES18H2.25 ZA5
The Gen 6 ESS may require some rectifier parameters to be changed in order to operate correctly. The procedure to change the parameters varies depending on rectifier model. In general, the following changes are necessary:

  1. The "Low Voltage Battery Disconnect" must be disabled. The ESS does not require protection from low voltage discharge.

  2. The rectifier float voltage must be set to 54.5 VDC.

  3. The battery capacity (accumulator capacity) and maximum charge current must be adjusted to allow for the maximum charge current required for the ESS. The bus current required to charge the ESS varies depending on ESS model and circuit breaker configuration.

Caterpillar Information System:

XQ400 Power Module Sensors and Electrical Components
XQ400 Power Module Plate Locations and Film Locations
XQ400 Power Module Fan Drive Bearing - Lubricate
XQ400 Power Module Coolant Level - Check
G3606 and G3608 Engines Gear Group (Rear) - Remove and Install
3512C Generator Set Engine Rocker Shaft and Pushrod - Install
794 AC Off-Highway Truck Field Assembly Brakes - Install
3512C Generator Set Engine Air Inlet Manifold - Remove and Install
2015/07/23 Improved Lines Group for the Seat Suspension Is Now Available for Certain Machines {7312, 7324}
Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324} Installation Procedure for the 467-8080 TLV2 Seat Suspension Harness Kit{1408, 7312, 7324}
Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920} Software Updates for Certain Tier 4 Final Industrial Engines{1000, 1920}
C280-08 Tier 4 Engine Turbocharger - Assemble
C280 Marine Engines Air Inlet and Exhaust System Operation - Aftertreatment
HPU300 Hydraulic Power Pack Transport Information
New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620} New Engine Monitoring System III Software Is Now Used on Certain 3508B, 3512B, 3512C, and 3516B Engines {7490, 7620}
349F and 352F Excavators Machine System Specifications Coupler Lines
349F and 352F Excavators Machine System Specifications Boom Lines
349F and 352F Excavators Machine System Specifications Coupler Lines
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines
349F and 352F Excavators Machine System Specifications Drain Line
349F and 352F Excavators Machine System Specifications Auxiliary Hydraulic Lines
336D2 and 340D2 Excavators Machine System Pressure Reducing Valve
349F and 352F Excavators Machine System Specifications Stick Lines
349F and 352F Excavators Machine System Specifications Boom - 11.5 m (37.61 ft)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.