Flywheel - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Guide Bolt M16 - 2 by 4 inch |
1 |
| B | 421-5663 | Lifting Eye Assembly | 2 |
- Remove top bolt (1) and install Tooling (A). Remove remaining bolts (1).
Show/hide table
Illustration 2 g03834046 - Use Tooling (B) and a suitable lifting device to remove flywheel (2). The weight of flywheel (2) is approximately
43 kg (95 lb) . - Use a hammer and a punch in order to remove the flywheel ring gear, if necessary.
Show/hide table
| |
| Illustration 1 | g03834019 |
- Install flywheel (2) in the reverse order of removal.
- Raise the temperature of the flywheel ring gear. Do not use a torch to heat the flywheel ring gear. Install the flywheel ring gear on the flywheel. Position the flywheel ring gear with the part number toward the crankshaft. Allow the flywheel ring gear to cool. Use a soft hammer in order to seat the flywheel ring gear against the shoulder of the flywheel.
Caterpillar Information System:
XQ400 Power Module Maintenance Interval Schedule
G3606 and G3608 Engines Aftercooler - Remove and Install
C8.7 Marine Engines Expansion Tank
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
C9.3 Marine Engine Water Pump - Assemble
C9.3 Marine Engine Water Pump - Disassemble
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
C9.3 Marine Engine Water Pump - Remove and Install
3516C Industrial Engine Maintenance Interval Schedule
C9.3 Marine Engine Engine Oil Pump - Remove and Install
3516C Marine Engines Diesel Exhaust Fluid Pump - Remove and Install
PM820, PM822, and PM825 Cold Planer Shipping the Machine
797F Off-Highway Truck Field Assembly Walkway (Left Hand) - Install
C9.3 Marine Engine Flywheel Housing - Remove and Install
C9.3 Marine Engine Vibration Damper and Pulley - Remove and Install
2015/05/15 A New Gas Tube Assembly Is Used on Certain 3512C Dynamic Gas Blending Oil Well Service Engines {1250}
Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239} Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239}
3512C and 3516C Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158} Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158}
C9.3 Marine Engine Front Cover - Remove and Install
C11, C13, C15, and C18 Industrial Engines NRS Exhaust Gas Temperature Is High
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122} 442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
XQC1200 and XQC1600 Power Modules Circuit Breaker Panel - Remove and Install