Expansion Tank
Show/hide table
 | |
| Illustration 1 | g03833863 |
Show/hide table
| Specification for 217-8342 Fuel Priming Pump and Water Separator | |||
| Item | Qty | Part | Specification Description |
| 1 | 2 | 442-9485 Hose Adapters | Torque to 40 ± 4 N·m (30 ± 3 lb ft) |
| 2 | 1 | 442-9508 Adapter | Torque to 60 ± 6 N·m (44 ± 4 lb ft) |
| 3 | 1 | 439-2680 Plug | Torque to 22 ± 2.2 N·m (194.7 ± 19.5 lb in) |
| 4 | 2 | 442-9483 Unions | Torque to 22 ± 2.2 N·m (194.7 ± 19.5 lb in) |
| 5 | 1 | 442-9517 Plug | Torque to 40 ± 4 N·m (30 ± 3 lb ft) |
| 6 | 1 | 442-9514 Radiator Cap | Pressure Settings : Nominal value - 1 ± 0.1 bar (14.5 ± 1.45 psi) Depression value - −0.04 bar (−0.58 psi) Open setting - 0.10 bar (1.45 psi) |
| 7 | 1 | 448-8699 Sensor (Coolant Level) | Torque to 25 ± 2.5 N·m (221 ± 22 lb in) |
| 8 | 1 | 442-9478 Reducer | Torque to 30 ± 3 N·m (266 ± 27 lb in) |
Caterpillar Information System:
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
C9.3 Marine Engine Water Pump - Assemble
C9.3 Marine Engine Water Pump - Disassemble
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
C9.3 Marine Engine Water Pump - Remove and Install
3516C Industrial Engine Maintenance Interval Schedule
C9.3 Marine Engine Engine Oil Pump - Remove and Install
3516C Marine Engines Diesel Exhaust Fluid Pump - Remove and Install
3516C Marine Engines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C9.3 Marine Engine Engine Oil Cooler - Remove and Install - Combined Circuit Keel Cooling
3516C Marine Engines Pressure Sensor (Exhaust Inlet) - Remove and Install
G3606 and G3608 Engines Aftercooler - Remove and Install
XQ400 Power Module Maintenance Interval Schedule
C9.3 Marine Engine Flywheel - Remove and Install
PM820, PM822, and PM825 Cold Planer Shipping the Machine
797F Off-Highway Truck Field Assembly Walkway (Left Hand) - Install
C9.3 Marine Engine Flywheel Housing - Remove and Install
C9.3 Marine Engine Vibration Damper and Pulley - Remove and Install
2015/05/15 A New Gas Tube Assembly Is Used on Certain 3512C Dynamic Gas Blending Oil Well Service Engines {1250}
Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239} Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239}
3512C and 3516C Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158} Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158}
C9.3 Marine Engine Front Cover - Remove and Install