Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Show/hide table
Illustration 1 | g03834800 |
Show/hide table
Specification for the 340-3707 Engine Oil Lines Gp     | |||
---|---|---|---|
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 6B-9202 Spring     | Length under test force is 68.3 mm (2.69 inch).     |
Test force is 84.5 to 99.6 N (19.0 to 22.4 lb). |
|||
Free length after test is 112.7 mm (4.4 inch). |
|||
2     | 1     | 2W-1053 Plug     | Torque to 100 ± 15 N·m (74 ± 11 lb ft)     |
3     | 2     | 109-2332 O-Ring Seal     | Lubricate the bore lightly with the lubricant that is being sealed.     |
4     | 2     | 237-7623 O-Ring Seal     | Lubricate the bore lightly with the lubricant that is being sealed.     |
5     | 2     | 0S-1594 Bolt     | Use the following procedure in order to tighten the bolts of the clamp assembly: 1. Tighten the clamp assembly until the clamp assembly snug to tube. 2. Tighten the clamp assembly to the adapter. 3. Tighten the clamp assembly to the tube.     |
6     | 2     | 0S-1571 Bolt     | |
7     | 1     | 2W-1635 Spring     | Length under test force is 102.0 mm (4.02 inch).     |
Test force is 518 ± 26 N (116 ± 6 lb). |
|||
Free length after test is 143.4 mm (5.65 inch). |
Caterpillar Information System:
Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239} Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239}
2015/05/15 A New Gas Tube Assembly Is Used on Certain 3512C Dynamic Gas Blending Oil Well Service Engines {1250}
C9.3 Marine Engine Vibration Damper and Pulley - Remove and Install
C9.3 Marine Engine Flywheel Housing - Remove and Install
797F Off-Highway Truck Field Assembly Walkway (Left Hand) - Install
PM820, PM822, and PM825 Cold Planer Shipping the Machine
C9.3 Marine Engine Flywheel - Remove and Install
XQ400 Power Module Maintenance Interval Schedule
G3606 and G3608 Engines Aftercooler - Remove and Install
C8.7 Marine Engines Expansion Tank
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
C9.3 Marine Engine Water Pump - Assemble
Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158} Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158}
C9.3 Marine Engine Front Cover - Remove and Install
C11, C13, C15, and C18 Industrial Engines NRS Exhaust Gas Temperature Is High
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122} 442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
XQC1200 and XQC1600 Power Modules Circuit Breaker Panel - Remove and Install
C27 and C32 Engine for MD6250 and MD6310 Drill Coolant Level - Test
The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269} The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269}
3406E Engine Cylinder Head - Install
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test
3500 Engines Housing (Front)
C9.3 Marine Engine Cylinder Block Cover - Remove and Install
C9.3 Marine Engine Valve Mechanism Cover - Remove and Install