Vibration Damper and Pulley - Remove and Install
- Remove bolts (1) and guard (2).
Show/hide table
Illustration 2 g03834483 - Remove bolts (3), spacer (4), and damper (5).
Show/hide table
Illustration 3 g03834594 - Remove pulley (6).
Show/hide table
Illustration 1 | g03834465 |
- Install pulley (6) and vibration damper (5) in the reverse order of removal.
- Tighten bolts (3) by hand. Tighten bolts (3) in numerical sequence shown in illustration 4 to a final torque of
55 ± 10 N·m (41 ± 7 lb ft) .
Show/hide tableIllustration 4 g03834603 - Tighten bolts (3) by hand. Tighten bolts (3) in numerical sequence shown in illustration 4 to a final torque of
Caterpillar Information System:
C9.3 Marine Engine Flywheel Housing - Remove and Install
797F Off-Highway Truck Field Assembly Walkway (Left Hand) - Install
PM820, PM822, and PM825 Cold Planer Shipping the Machine
C9.3 Marine Engine Flywheel - Remove and Install
XQ400 Power Module Maintenance Interval Schedule
G3606 and G3608 Engines Aftercooler - Remove and Install
C8.7 Marine Engines Expansion Tank
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
C9.3 Marine Engine Water Pump - Assemble
C9.3 Marine Engine Water Pump - Disassemble
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
2015/05/15 A New Gas Tube Assembly Is Used on Certain 3512C Dynamic Gas Blending Oil Well Service Engines {1250}
Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239} Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239}
3512C and 3516C Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158} Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158}
C9.3 Marine Engine Front Cover - Remove and Install
C11, C13, C15, and C18 Industrial Engines NRS Exhaust Gas Temperature Is High
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122} 442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
XQC1200 and XQC1600 Power Modules Circuit Breaker Panel - Remove and Install
C27 and C32 Engine for MD6250 and MD6310 Drill Coolant Level - Test
The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269} The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269}
3406E Engine Cylinder Head - Install
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Passive) - Test