Flywheel Housing - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 395-1100 | Lifting Eye Assembly | 2 |
| B | - | Loctite High Flex Form-In-Place Gasket | - |
Start By:
- Remove flywheel
- Remove electronic starting motors if equipped.
- Remove bolts (2) and bracket (1).
Show/hide table
Illustration 2 g03834371 - Use Tooling (A) and a suitable lifting device to remove flywheel housing (3). The weight of flywheel housing (3) is approximately
59 kg (130 lb) . - Remove bolts (4), bolts (5) (not shown), and flywheel housing (3).
Show/hide table
| |
| Illustration 1 | g03834333 |
Note: Typical installation.
- Install flywheel housing (3) in the reverse order of removal.
- Apply Tooling (B) to the entire joint face of flywheel housing (3).
Caterpillar Information System:
797F Off-Highway Truck Field Assembly Walkway (Left Hand) - Install
PM820, PM822, and PM825 Cold Planer Shipping the Machine
C9.3 Marine Engine Flywheel - Remove and Install
XQ400 Power Module Maintenance Interval Schedule
G3606 and G3608 Engines Aftercooler - Remove and Install
C8.7 Marine Engines Expansion Tank
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
C9.3 Marine Engine Water Pump - Assemble
C9.3 Marine Engine Water Pump - Disassemble
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
C9.3 Marine Engine Water Pump - Remove and Install
C9.3 Marine Engine Vibration Damper and Pulley - Remove and Install
2015/05/15 A New Gas Tube Assembly Is Used on Certain 3512C Dynamic Gas Blending Oil Well Service Engines {1250}
Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239} Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239}
3512C and 3516C Industrial Engines Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158} Procedure to Adjust Track Tension on Variable Gauge Undercarriages {4157, 4158}
C9.3 Marine Engine Front Cover - Remove and Install
C11, C13, C15, and C18 Industrial Engines NRS Exhaust Gas Temperature Is High
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122} 442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
XQC1200 and XQC1600 Power Modules Circuit Breaker Panel - Remove and Install
C27 and C32 Engine for MD6250 and MD6310 Drill Coolant Level - Test
The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269} The Hose and Tube Assembly in the Service Brake Control Group May Fail on Certain 777G Off-Highway Trucks{4257, 4269}
3406E Engine Cylinder Head - Install