Water Pump - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Group | 1 |
Start By:
- Remove water pump.
- Remove bolts (7) and pulley (13).
- Remove bolts (8), O-ring seal (1), and cover (2).
- Remove O-ring seal (9), seal (3), and seal (4).
- Use Tooling (A) and a suitable press to remove shaft assembly (6) from impeller (10) and housing (5).
- Use Tooling (A) and a suitable press to remove seal assembly (11) from shaft assembly (6).
- Use Tooling (A) and a suitable press to remove hub (12) from shaft assembly (6).
Show/hide table
Illustration 1 | g03833684 |
Caterpillar Information System:
C2.2 Engines For Caterpillar Built Machines Sensor Signal (Analog, Active) - Test
Installation Procedure for Excitation Modules 10 and 15{4467} Installation Procedure for Excitation Modules 10 and 15{4467}
C9.3 Marine Engine Water Pump - Remove and Install
3516C Industrial Engine Maintenance Interval Schedule
C9.3 Marine Engine Engine Oil Pump - Remove and Install
3516C Marine Engines Diesel Exhaust Fluid Pump - Remove and Install
3516C Marine Engines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C9.3 Marine Engine Engine Oil Cooler - Remove and Install - Combined Circuit Keel Cooling
3516C Marine Engines Pressure Sensor (Exhaust Inlet) - Remove and Install
3516C Marine Engines Temperature Sensor (Exhaust Inlet) - Remove and Install
3516C Marine Engines Temperature Sensor (Exhaust Outlet) - Remove and Install
2015/05/12 New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
C9.3 Marine Engine Water Pump - Assemble
C9.3 Marine Engine Water Temperature Regulator - Remove and Install
C8.7 Marine Engines Expansion Tank
G3606 and G3608 Engines Aftercooler - Remove and Install
XQ400 Power Module Maintenance Interval Schedule
C9.3 Marine Engine Flywheel - Remove and Install
PM820, PM822, and PM825 Cold Planer Shipping the Machine
797F Off-Highway Truck Field Assembly Walkway (Left Hand) - Install
C9.3 Marine Engine Flywheel Housing - Remove and Install
C9.3 Marine Engine Vibration Damper and Pulley - Remove and Install
2015/05/15 A New Gas Tube Assembly Is Used on Certain 3512C Dynamic Gas Blending Oil Well Service Engines {1250}
Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239} Thinner Spacer Plates Not Recommended On Certain 3406E Through C18 On-Highway Truck Engines To Resolve Cylinder Liner Projection{1239}