1994/12/01 Caterpillar


New Exhaust Manifold Gasket Available{1059}

Usage:


3116 (7SF, 9CJ, 2BK, 9GK, 7JL, 9LN) Truck Engines

Description of Change: A new exhaust manifold gasket is available for 3116 Truck Engines. The new gasket has a laminated "Graphoil" and stainless steel construction. This allows the new gasket to slide as the exhaust manifold moves relative to the cylinder head.

Adaptable To: The new 113-6200 Exhaust Manifold Gasket is available to replace the former 6I-3034 Exhaust Manifold Gasket in 3116 Truck Engines.

Caterpillar Information System:

1994/12/01 Cold Weather Operation Reminder{0374}
1994/11/01 Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/01 Engine Oil Capacity Change{1326,7542}
1994/11/01 Unit Injector Removal And Installation{1290}
1994/11/01 Fuel System Pressure{1256}
1994/11/01 Fuel Injection Nozzle Reference {1254}
1994/11/01 Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/01 New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01 Check 9U-7242 Valve Spring Compressor Plate For Correct Thickness{0703}
1994/10/01 Corrections To 3176B/3406E Electronic Troubleshooting Guide{0374,1901}
1994/10/01 New Rear Crankshaft Seal Groups Available{1161}
1994/10/01 Catalytic Converter/Muffler Identification{1062,1091}
1994/12/01 Black Painted Valve Covers Available{1107}
1995/01/01 New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/01/01 Electronic Unit Injector (EUI) Replacement{1290}
1995/01/01 Description Of January 1995 (JAN95) Personality Module Changes {1902}
1995/01/01 Electronic Timing Advance Improvements{1272,1253,1264}
1995/02/01 Special Electronic Control Module (ECM) Used With J1939 Data Link And Eaton Autoshift Transmission{1901}
1995/02/01 Fabricated Tool For Holding Air Compressor Drive Gear While Tightening Nut On Compressor Crankshaft{0600,1803}
1995/02/01 New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01 Returning Core Engines For Full Refund {0374}
1995/03/01 New Fuel Injection Pump Group{1251}
1995/03/01 Governors Now Use New Low Mass Weight Carrier{1272}
1995/03/01 Improved Air Fuel Ratio Control (AFRC){1278}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.