Fuel Injection Nozzle Reference {1254}
Usage:
3406B/C (3ZJ, 8PN) Truck Engines
- SUPPLEMENT: 11/01/94
Truck Engine News, November 1994, Page 2, "Fuel Injection Nozzle Reference" Disregard this article. See the article with the same title in this issue.
--------------- END SUPPLEMENT ---------------
Several fuel injection nozzle changes have occured as part of required engine changes to meet EPA certification. Use this article as a reference to ensure the correct fuel injection nozzles are used.
Caterpillar Information System:
1994/11/01 Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/01 New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01 Check 9U-7242 Valve Spring Compressor Plate For Correct Thickness{0703}
1994/10/01 Corrections To 3176B/3406E Electronic Troubleshooting Guide{0374,1901}
1994/10/01 New Rear Crankshaft Seal Groups Available{1161}
1994/10/01 Catalytic Converter/Muffler Identification{1062,1091}
1994/09/01 Caterpillar Legendary Service Literature Catalog SELD0811 Updated{0374}
1994/09/01 117-7213 Control Group (Vehicle Speed Filter) Available For Field Installation{1914}
1994/09/01 New Gasket Provides Improved Sealing Between Air Compressor And Drive{1803}
1994/09/01 Impeller Appearance On Remanufactured 3406 Water Pump{1364,1361}
1994/09/01 New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance{1251}
1994/09/01 Additional Parts Now Provided With 0R-4180 Remanufactured Cylinder Head Assembly{1100}
1994/11/01 Fuel System Pressure{1256}
1994/11/01 Unit Injector Removal And Installation{1290}
1994/11/01 Engine Oil Capacity Change{1326,7542}
1994/11/01 Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01 Cold Weather Operation Reminder{0374}
1994/12/01 New Exhaust Manifold Gasket Available{1059}
1994/12/01 Black Painted Valve Covers Available{1107}
1995/01/01 New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/01/01 Electronic Unit Injector (EUI) Replacement{1290}
1995/01/01 Description Of January 1995 (JAN95) Personality Module Changes {1902}
1995/01/01 Electronic Timing Advance Improvements{1272,1253,1264}
1995/02/01 Special Electronic Control Module (ECM) Used With J1939 Data Link And Eaton Autoshift Transmission{1901}