Track
Show/hide table
| |
| Illustration 1 | g03360314 |
|
Typical example (1) Standard pin (2) Master pin | |
Show/hide table
| Item | Qty | Part | Specification Description |
| - | - | - | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
| - | - | - | Use the following procedure to tighten the track bolts:
1. Tighten the track bolts to 2. Tighten the bolts to an extra 120 ± 5 degrees. |
| - | - | - | The maximum assembly force for the link assembly is |
| - | - | - | The assembly force for the master pin is |
| A | - | - | Protrusion for the master bushing on each end is |
| B | - | - | Protrusion for the pin on each end is |
| C | - | - | Distance between the bolt holes is |
| D | - | - | Distance between the bolt holes is |
Show/hide table
| (1) | For 301-2300, 311-1926, 311-8145, 311-8148 and 457-5134. |
| (2) | For 500-1131. |
Caterpillar Information System:
C7.1 Engines Electronic Control Module - Remove and Install
C7.1 Engines Electric Starting Motor - Remove and Install
C7.1 Engines ECM Mounting Bracket - Remove and Install
C7.1 Engines Cylinder Head - Remove
C7.1 Engines Cylinder Head - Install
C7.1 Engines Crankshaft Timing Ring - Remove and Install
C7.1 Engines Crankshaft Rear Seal - Remove
C7.1 Engines Crankshaft Rear Seal - Install
C7.1 Engines Crankshaft Position Sensor - Remove and Install
C7.1 Engines Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C7.1 Engines Crankshaft Gear - Remove and Install
C7.1 Engines Crankshaft Front Seal - Remove and Install
C280-16 Engine Fluid Recommendations
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Information (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Internal Component Preremoval Steps (Input/Output Cabinet)
C7.1 Engines Electronic Unit Injector - Install
C7.1 Engines Electronic Unit Injector - Remove
C7.1 Engines Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Engines Engine Oil Filter Base - Remove and Install
C7.1 Engines Engine Oil Pan - Install - Aluminum Oil Pan
C7.1 Engines Engine Oil Pan - Remove - Aluminum Oil Pan