Crankshaft Rear Seal - Remove
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 227-4390 | E12 Torx 套筒 | 1 |
开始:
- 拆下飞轮壳体。 有关正确步骤，请参阅拆解和组装, "飞轮壳 - 拆卸和安装"。
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
| 注意 |
|---|
|
在检验、保养、测试、调整及维修产品时，务必留心，确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前，要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
Show/hide table
| |
| 图 1 | g03363531 |
- 使用工具 (A) 将 Torx 螺钉 (1) 从曲轴后密封组件 (2) 上拆下。
- 将曲轴后密封组件 (2) 从缸体上卸下。 废弃曲轴后密封组件 (2)。
注: 曲轴后密封组件不可维修。 如果拆下了曲轴后密封组件，必须更换该组件。
Caterpillar Information System:
C7.1 Engines Crankshaft Rear Seal - Install
C7.1 Engines Crankshaft Position Sensor - Remove and Install
C7.1 Engines Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C7.1 Engines Crankshaft Gear - Remove and Install
C7.1 Engines Crankshaft Front Seal - Remove and Install
C7.1 Engines Crankshaft Front Seal - Remove and Install - Crankshaft Front Seal for Heavy Duty Front Cover
C7.1 Engines Crankshaft - Remove
C7.1 Engines Crankshaft - Install
C7.1 Engines Crankcase Breather - Remove - Unfiltered Breather
C7.1 Engines Crankcase Breather - Install - Unfiltered Breather
C7.1 Engines Crankcase Breather - Remove - Filtered Breather
C7.1 Engines Crankcase Breather - Install - Filtered Breather
C7.1 Engines Crankshaft Timing Ring - Remove and Install
C7.1 Engines Cylinder Head - Install
C7.1 Engines Cylinder Head - Remove
C7.1 Engines ECM Mounting Bracket - Remove and Install
C7.1 Engines Electric Starting Motor - Remove and Install
C7.1 Engines Electronic Control Module - Remove and Install
349F and 352F Excavators Machine System Specifications Track
C280-16 Engine Fluid Recommendations
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Information (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Internal Component Preremoval Steps (Input/Output Cabinet)
C7.1 Engines Electronic Unit Injector - Install
C7.1 Engines Electronic Unit Injector - Remove