Crankcase Breather - Install - Filtered Breather
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 遵循步骤 1.a 至步骤 1.c 安装呼吸器组件 (5)。
- 将呼吸器组件 (5) 定位到进气歧管 (10) 上。
- 将螺栓 (9) 安装到呼吸器组件 (5) 上。 安装螺栓时,支承呼吸器组件。
- 拧紧螺栓 (9) 至扭矩为
22 N·m (195 lb in) 。
- 如有必要,安装一个新的滤罐 (11)。 有关正确步骤,请参阅操作和保养手册, "曲轴箱呼吸器(滤罐)- 更换"。
Show/hide table
图 2 g03396856 - 确保软管 (3) 和软管 (7) 无损坏或阻塞。 如有损坏或阻塞,更换软管。
- 将软管 (7) 安装在呼吸器组件 (5) 上。 确保软管朝向正确。
- 牢固地拧紧软管卡箍 (6)。
- 将新电缆带 (8) 安装到软管 (7) 上。
注: 确保电缆带符合原始设备制造商(OEM)的技术规格。
- 将软管 (3) 安装到气门机构盖 (1) 和呼吸器组件 (5) 上。
- 牢固拧紧软管卡箍 (2) 和软管卡箍 (4)。
- 对于顶装式涡轮发动机,将隔热罩安装到气门机构盖 (1) 上。
Show/hide table
图 1 | g03396857 |
Caterpillar Information System:
C7.1 Engines Coolant Temperature Sensor - Remove and Install
C7.1 Engines Connecting Rod Bearings - Remove - Connecting rods in position
C7.1 Engines Connecting Rod Bearings - Install - Connecting rods in position
C7.1 Engines Camshaft Gear - Remove and Install
C7.1 Engines Camshaft Bearings - Remove and Install
C7.1 Engines Camshaft - Remove and Install
C7.1 Engines Boost Pressure Sensor - Remove and Install
C7.1 Engines Alternator Belt - Remove and Install
C7.1 Engines Alternator - Remove
C7.1 Engines Alternator - Install
C7.1 Engines Air Compressor - Remove and Install - Twin Cylinder Air Compressor
C7.1 Engines Air Compressor - Remove and Install - Single Cylinder Air Compressor
C7.1 Engines Crankcase Breather - Remove - Filtered Breather
C7.1 Engines Crankcase Breather - Install - Unfiltered Breather
C7.1 Engines Crankcase Breather - Remove - Unfiltered Breather
C7.1 Engines Crankshaft - Install
C7.1 Engines Crankshaft - Remove
C7.1 Engines Crankshaft Front Seal - Remove and Install - Crankshaft Front Seal for Heavy Duty Front Cover
C7.1 Engines Crankshaft Front Seal - Remove and Install
C7.1 Engines Crankshaft Gear - Remove and Install
C7.1 Engines Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C7.1 Engines Crankshaft Position Sensor - Remove and Install
C7.1 Engines Crankshaft Rear Seal - Install
C7.1 Engines Crankshaft Rear Seal - Remove