Crankcase Breather - Install - Unfiltered Breather
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 确保曲轴箱呼吸器的所有部件清洁且无损坏。 更换任何损坏的部件。
Show/hide table
图 1 g03390502 - 确保软管 (1) 无损坏和阻塞。 如有损坏或阻塞，更换软管。
- 将软管 (1) 安装到气门机构盖上。
- 牢固地拧紧卡箍 (2)。
- 将软管 (1) 定位到夹子 (3) 和夹子 (4) 中。
- 对于顶装式涡轮发动机，将隔热罩安装到气门机构盖上。
Caterpillar Information System:
C7.1 Engines Crankcase Breather - Remove - Filtered Breather
C7.1 Engines Crankcase Breather - Install - Filtered Breather
C7.1 Engines Coolant Temperature Sensor - Remove and Install
C7.1 Engines Connecting Rod Bearings - Remove - Connecting rods in position
C7.1 Engines Connecting Rod Bearings - Install - Connecting rods in position
C7.1 Engines Camshaft Gear - Remove and Install
C7.1 Engines Camshaft Bearings - Remove and Install
C7.1 Engines Camshaft - Remove and Install
C7.1 Engines Boost Pressure Sensor - Remove and Install
C7.1 Engines Alternator Belt - Remove and Install
C7.1 Engines Alternator - Remove
C7.1 Engines Alternator - Install
C7.1 Engines Crankcase Breather - Remove - Unfiltered Breather
C7.1 Engines Crankshaft - Install
C7.1 Engines Crankshaft - Remove
C7.1 Engines Crankshaft Front Seal - Remove and Install - Crankshaft Front Seal for Heavy Duty Front Cover
C7.1 Engines Crankshaft Front Seal - Remove and Install
C7.1 Engines Crankshaft Gear - Remove and Install
C7.1 Engines Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C7.1 Engines Crankshaft Position Sensor - Remove and Install
C7.1 Engines Crankshaft Rear Seal - Install
C7.1 Engines Crankshaft Rear Seal - Remove
C7.1 Engines Crankshaft Timing Ring - Remove and Install
C7.1 Engines Cylinder Head - Install