General Information (Input/Output Cabinet)
The Input/Output (I/O) cabinet is the utility power input cabinet for the UPS.
The I/O cabinet provides the primary connection points for 3-wire AC connections to the UPS. Facility 3-phase wiring is connected to the bus in the cabinet. Regulated or unregulated, 3-wire power or 4-wire power can exit the I/O cabinet.
When the system is in maintenance bypass, the 3-wire power is also output via the I/O cabinet.
Show/hide table
Illustration 1 | g03797279 |
(1) Cable to bus bar connection locations for input and output
(2) GSM CB1 switch/breaker |
Show/hide table
Illustration 2 | g03797282 |
Cable connections |
Show/hide table
Illustration 3 | g01258608 |
I/O cabinet with single input and no switches (8) System (output bus) (9) System (input bus) (10) MMU (input bus) (11) Output bus |
Show/hide table
Illustration 4 | g01258702 |
I/O cabinet with dual input and no switches (15) Bypass input bus |
Show/hide table
Illustration 5 | g03797453 |
I/O cabinet right panel example (component location is not the same on all units) (17) External source SYNC relay option (18) Transformer T1 (19) Fuses F13-F17 |
Caterpillar Information System:
C280-16 Engine Fluid Recommendations
349F and 352F Excavators Machine System Specifications Track
C7.1 Engines Electronic Control Module - Remove and Install
C7.1 Engines Electric Starting Motor - Remove and Install
C7.1 Engines ECM Mounting Bracket - Remove and Install
C7.1 Engines Cylinder Head - Remove
C7.1 Engines Cylinder Head - Install
C7.1 Engines Crankshaft Timing Ring - Remove and Install
C7.1 Engines Crankshaft Rear Seal - Remove
C7.1 Engines Crankshaft Rear Seal - Install
C7.1 Engines Crankshaft Position Sensor - Remove and Install
C7.1 Engines Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Internal Component Preremoval Steps (Input/Output Cabinet)
C7.1 Engines Electronic Unit Injector - Install
C7.1 Engines Electronic Unit Injector - Remove
C7.1 Engines Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Engines Engine Oil Filter Base - Remove and Install
C7.1 Engines Engine Oil Pan - Install - Aluminum Oil Pan
C7.1 Engines Engine Oil Pan - Remove - Aluminum Oil Pan
C7.1 Engines Engine Oil Pressure Sensor - Remove and Install
C7.1 Engines Engine Oil Pump - Install