Engine Oil Pan - Remove - Aluminum Oil Pan
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
Show/hide table
图 1 | g03409386 |
- 如有必要,拆卸油尺管组件。 松开螺母 (5),然后拆下管组件 (4)。 将密封 (6) 从管组件上拆下。
注: 确定管组件的位置和朝向。
- 在发动机油底壳下面放一个适当的容器。 拆下排放塞 (2),排放发动机机油。 有关正确步骤,请参阅操作和保养手册, "发动机机油和滤清器 - 更换"。
- 将 O 形密封圈 (3) 从排放塞 (2) 上拆下。
- 将原始设备制造商(OEM)导线线束组件从机油油位开关的导线线束组件 (1) 上断开。
Show/hide table
图 2 g03409387 - 支撑发动机油底壳组件 (9)。
- 将螺栓 (10) 和螺栓 (11) 从发动机油底壳组件 (9) 上拆下。
- 将发动机油底壳组件 (9) 从发动机上拆下。
- 拆卸密封垫 (8)。
Show/hide table
图 3 g03409388 - 必要时,遵循步骤 9.a 至步骤 9.c 将机油油位开关 (12) 从发动机油底壳 (9) 上拆下。
- 将新电缆带 (14) 从机油油位开关 (12) 的线束组件上切断。
- 将机油油位开关 (12) 从发动机油底壳 (9) 上拆下。
- 将 O 形密封圈 (12) 从机油油位开关 (12) 上拆下。
Caterpillar Information System:
C7.1 Engines Engine Oil Pan - Install - Aluminum Oil Pan
C7.1 Engines Engine Oil Filter Base - Remove and Install
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Install - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Install - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Engines Electronic Unit Injector - Remove
C7.1 Engines Electronic Unit Injector - Install
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Internal Component Preremoval Steps (Input/Output Cabinet)
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies General Information (Input/Output Cabinet)
C280-16 Engine Fluid Recommendations
349F and 352F Excavators Machine System Specifications Track
C7.1 Engines Engine Oil Pressure Sensor - Remove and Install
C7.1 Engines Engine Oil Pump - Install
C7.1 Engines Engine Oil Pump - Remove
C7.1 Engines Exhaust Elbow - Remove and Install
C7.1 Engines Exhaust Manifold - Remove and Install - Side Mounted Exhaust Manifold
C7.1 Engines Exhaust Manifold - Remove and Install - Top Mounted Exhaust Manifold
C7.1 Engines Fan - Remove and Install
C7.1 Engines Fan Drive - Remove and Install
C7.1 Engines Flow Control Valve - Remove and Install
C7.1 Engines Flywheel - Install - Equipped with Rear Power Take-Off
C7.1 Engines Flywheel - Install
C7.1 Marine Engine Engine Oil Filter Base - Remove and Install - Non M.C.S. Arrangement