Speed/Timing Sensor - Remove and Install
- Disconnect harness assembly(not shown) and remove bolt (3) and bracket (2).
- Remove speed/timing sensor (1).
Show/hide table
Illustration 1 | g03035983 |
- Install speed/timing sensor (1) in the reverse order of removal
Caterpillar Information System:
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Maintenance Interval Schedule
2013/03/12 Bearing Service Interval Is Extended for Certain Uninterruptible Power Supplies {4480, 7551}
C9.3 Tier 4 Final Engines Speed/Timing - Test
320 VH and VM Variable Gauge Undercarriage Final Drive - Disassemble
320 VH and VM Variable Gauge Undercarriage Final Drive - Assemble
2012/07/23 Improved Hose Assemblies Are Now Used on Certain C27 and C32 Petroleum Engines {1307, 1308}
C13-XQ350 Rental Generator Set Starting the Engine
C32 Marine Engines Fuel Temperature Sensor - Remove and Install
C13, C15, and C18 Tier 4 Final Engines SCR Warning System Problem
TH48-E80 Petroleum Transmission Selector and Pressure Control Valve (Transmission)
C9.3 Tier 4 Final Engines Power Is Intermittently Low or Power Cutout Is Intermittent
C32 Marine Engines Fuel Pressure Sensor - Remove and Install
C13-XQ350 Rental Generator Set Product Description
C7.1 Industrial Engine Introduction
C7.1 Industrial Engine Clean Emissions Module
C7.1 Industrial Engine DEF Dosing Control System
Investigation of Fault or Dropped Load on UPSB125/130 Systems{4480} Investigation of Fault or Dropped Load on UPSB125/130 Systems{4480}
2012/05/16 New Oil Level Gauges Are Used on Certain C7 Commercial Engines {1326}
C32 Marine Engines Inlet Air Temperature Sensor - Remove and Install
C32 Marine Engines Alternator - Remove and Install
C32 Marine Engines Electric Starting Motor - Remove and Install
C9.3 Tier 4 Final Engines Injector Solenoid - Test
325 VM and VH Variable Gauge Undercarriage Final Drive - Assemble
C13, C15, and C18 Tier 4 Final Engines Fuel Filter Is Restricted