C175-16 Marine Propulsion Engines Caterpillar


Engine Design

Usage:

C175-16 M6A



Illustration 1g01262912

Cylinder and valve location

(A) Inlet valves

(B) Exhaust valves

Number and arrangement of cylinders ... 60 degree V-16

Valves per cylinder ... 4

Displacement ... 85 L (5187 cu in)

Bore ... 175 mm (6.89 inch)

Stroke ... 220 mm (8.66 inch)

Compression ratio ... 15.3:1

Combustion ... Direct injection

When the crankshaft is viewed from the flywheel end, the crankshaft rotates in the following direction. ... Counterclockwise

Firing order (injection sequence)

Standard rotation CCW ... 1, 2, 5, 6, 13, 14, 9, 10, 15, 16, 11, 12, 3, 4, 7, 8

Note: The front end of the engine is opposite the flywheel end of the engine. The left and the right side of the engine are determined from the flywheel end. The number 1 cylinder is the front cylinder on the right side. The number 2 cylinder is the front cylinder on the left side.

Caterpillar Information System:

C1.5 and C2.2 Industrial Engines Alternator and Fan Belts - Inspect/Adjust
CX48-P2300 Petroleum Transmission Transmission Torque Converter Housing
C175-16 Locomotive Engine Power Is Intermittently Low or Power Cutout Is Intermittent
C175-16 Marine Engines Coolant Temperature Sensor - Test
3500 Generator Sets Coolant Temperature Regulator - Replace
3516C Industrial Engine Configuration Parameters
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Coolant Level - Check
3500 Generator Sets Coolant (ELC) - Change
C175-16 Marine Engines Testing the Cooling System
2012/03/28 New Oil Cooler Cover Gaskets and Torque Sequence Are Used on Certain C7 and 3126 Marine Engines {1378, 7555}
2012/04/24 New Engine Software Is Used on Tier 4 Interim C9.3 Through C18 Industrial Engines {1901, 1902, 1920}
C175-16 Marine Engines Engine Oil Pressure - Test
3500 Generator Sets Generator Winding - Test
PM3516 Power Modules Generator Winding Insulation - Test
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Rotating Rectifier - Inspect/Test
3500 Generator Sets Refill Capacities
3500 Generator Sets Fluid Recommendations
Drain Valves Leak on Certain Fuel Filters{1260, 1261} Drain Valves Leak on Certain Fuel Filters{1260, 1261}
2012/12/18 Replacement Bodies For the 773F, 775F, and 777F Off-Highway Trucks Will Now Be Serviced With the 773G, 775G, and 777G Off-Highway Trucks Production Bodies {7258}
3512C and 3516C Marine Auxiliary Engines Electrical Power Supply - Test
Reports of Corrosion and Pitting on the Front and Rear Suspension Cylinders and Hoist Cylinders on Certain Off-Highway Trucks{5102, 7200, 7201, 7213} Reports of Corrosion and Pitting on the Front and Rear Suspension Cylinders and Hoist Cylinders on Certain Off-Highway Trucks{5102, 7200, 7201, 7213}
Installation Procedure for Product Link PL421 Retrofit for Generator Sets{7606} Installation Procedure for Product Link PL421 Retrofit for Generator Sets{7606}
Procedure to Install an Updated Body Position Switch on Certain 773F and 775F Off-Highway Trucks{1408} Procedure to Install an Updated Body Position Switch on Certain 773F and 775F Off-Highway Trucks{1408}
CX48-P2300 Petroleum Transmission Transmission Torque Converter
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.