2012/03/28 Caterpillar


New Oil Cooler Cover Gaskets and Torque Sequence Are Used on Certain C7 and 3126 Marine Engines {1378, 7555}

Usage:

3126B 3GS
Marine Engine:
3126B MARINE (S/N: 3GS1-UP)
C7 MARINE (S/N: M7A1-UP; C7B1-UP; C7D1-UP; M7G1-UP; C7X1-UP; C7Z1-UP)

Description of Change: The new 300-7933 Gasket utilizes an improved design that provides a more robust seal inside the cover

Adaptable To: The new gasket is a direct replacement for the existing gasket. Refer to Table 1 for the correct part number.

Table 1
New Part Number     Existing Part Number    
300-7933     7E-9817    



Illustration 1g02963905

Refer to Illustration 1 for the proper torque sequence for the bolts that secure the oil cooler.

Caterpillar Information System:

2012/04/24 New Engine Software Is Used on Tier 4 Interim C9.3 Through C18 Industrial Engines {1901, 1902, 1920}
C175-16 Marine Engines Engine Oil Pressure - Test
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205} Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267} Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
140H and 160H Motor Graders Engine Supplement Air Compressor - Assemble
140H and 160H Motor Graders Engine Supplement Air Compressor - Disassemble
SPF343 and SPF343C Trailer Mounted Pumpers Engine Oil and Filter - Change
C175-16 Marine Engines Air Starting System
C175-16 Marine Engines Restriction of Air Inlet and Exhaust
SPF343 and SPF343C Trailer Mounted Pumpers Safety Messages - Type 2 Safety Messages
C175-16 Marine Engines Finding the Top Center Position for the No. 1 Piston
3512C and 3516C Marine Auxiliary Engines Injector Solenoid - Test
C175-16 Marine Engines Testing the Cooling System
3500 Generator Sets Coolant (ELC) - Change
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Coolant Level - Check
3516C Industrial Engine Configuration Parameters
3500 Generator Sets Coolant Temperature Regulator - Replace
C175-16 Marine Engines Coolant Temperature Sensor - Test
C175-16 Locomotive Engine Power Is Intermittently Low or Power Cutout Is Intermittent
CX48-P2300 Petroleum Transmission Transmission Torque Converter Housing
C1.5 and C2.2 Industrial Engines Alternator and Fan Belts - Inspect/Adjust
C175-16 Marine Propulsion Engines Engine Design
3500 Generator Sets Generator Winding - Test
PM3516 Power Modules Generator Winding Insulation - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.