Coolant Level - Check
Athugið hæð kælivökva þegar drepið er á aflvélinni og hún hefur kólnað niður.
Show/hide table
| |
| Skýringarmynd 1 | g00285520 |
|
Áfyllingarlok kælikerfisins | |
Show/hide table
 |
|
Kerfi undir þrýstingi: Heitur kælivökvi getur valdið alvarlegum bruna. Áður en tappi er tekinn af kælikerfinu verður að stöðva vélina og bíða uns einstakir hlutar kerfisins hafa kólnað. Losið tappann varlega af kælikerfinu til að létta á þrýstingi. |
- Fjarlægið áfyllingarlok kælikerfisins varlega til að losa um þrýsting.
- Haldið hæð kælivökva innan
13 mm (0.5 inch) frá botni áfyllingarrörsins. Ef aflvélin er búin hæðarglasi skal halda hæð kælivökva við eðlilega hæð í hæðarglasinu.Show/hide table
Skýringarmynd 2 g00103639 Hefðbundnar pakkningar áfyllingarloks - Þrífið áfyllingarlok kælikerfisins og athugið ástand pakkninga í lokinu. Skiptið um áfyllingarlok ef pakkningarnar hafa skemmst. Setjið áfyllingarlokið aftur á kælikerfið.
- Horfið eftir leka í kælikerfinu.
Caterpillar Information System:
3500 Generator Sets Coolant (ELC) - Change
C175-16 Marine Engines Testing the Cooling System
2012/03/28 New Oil Cooler Cover Gaskets and Torque Sequence Are Used on Certain C7 and 3126 Marine Engines {1378, 7555}
2012/04/24 New Engine Software Is Used on Tier 4 Interim C9.3 Through C18 Industrial Engines {1901, 1902, 1920}
C175-16 Marine Engines Engine Oil Pressure - Test
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205} Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267} Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
140H and 160H Motor Graders Engine Supplement Air Compressor - Assemble
140H and 160H Motor Graders Engine Supplement Air Compressor - Disassemble
SPF343 and SPF343C Trailer Mounted Pumpers Engine Oil and Filter - Change
C175-16 Marine Engines Air Starting System
C175-16 Marine Engines Restriction of Air Inlet and Exhaust
3516C Industrial Engine Configuration Parameters
3500 Generator Sets Coolant Temperature Regulator - Replace
C175-16 Marine Engines Coolant Temperature Sensor - Test
C175-16 Locomotive Engine Power Is Intermittently Low or Power Cutout Is Intermittent
CX48-P2300 Petroleum Transmission Transmission Torque Converter Housing
C1.5 and C2.2 Industrial Engines Alternator and Fan Belts - Inspect/Adjust
C175-16 Marine Propulsion Engines Engine Design
3500 Generator Sets Generator Winding - Test
PM3516 Power Modules Generator Winding Insulation - Test
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Rotating Rectifier - Inspect/Test
3500 Generator Sets Refill Capacities
3500 Generator Sets Fluid Recommendations