Restriction of Air Inlet and Exhaust
There will be a reduction in the performance of the engine if there is a restriction in the air inlet system or the exhaust system.
The air flow through the air cleaner may have a restriction. The pressure at the restriction of the air flow must not exceed
Back pressure is the difference in the pressure between the exhaust at the outlet elbow and the atmospheric air. Back pressure from the exhaust must not be more than
Caterpillar Information System:
SPF343 and SPF343C Trailer Mounted Pumpers Safety Messages - Type 2 Safety Messages
C175-16 Marine Engines Finding the Top Center Position for the No. 1 Piston
3512C and 3516C Marine Auxiliary Engines Injector Solenoid - Test
2012/03/26 An Improved Air Inlet Elbow Is Used for a Certain 3516B Marine Engine {1078}
Operation and Maintenance of 278-1150 Stud Tensioner Tooling Group - Used on C175 Engines{0599, 0701, 0705, 1201, 1202, 1203, 7551} Operation and Maintenance of 278-1150 Stud Tensioner Tooling Group - Used on C175 Engines{0599, 0701, 0705, 1201, 1202, 1203, 7551}
C175-16 Marine Engines Cooling System Operation
C175-16 Marine Engines Lubrication System Operation
Low Oil Pressure Shutdowns upon Cold Start-Ups for C175 Engines {0645, 1000} Low Oil Pressure Shutdowns upon Cold Start-Ups for C175 Engines {0645, 1000}
C175-16 Marine Engines Turbocharger
G3516 Petroleum Engines Gas Pressure Regulator Solenoid - Disassemble
C175-16 Marine Engines Aftercooler
C175-16 Marine Engines Air Inlet and Exhaust System Operation
C175-16 Marine Engines Air Starting System
SPF343 and SPF343C Trailer Mounted Pumpers Engine Oil and Filter - Change
140H and 160H Motor Graders Engine Supplement Air Compressor - Disassemble
140H and 160H Motor Graders Engine Supplement Air Compressor - Assemble
Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267} Thermal Spray Procedures for OHT Rear Duo-Cone Seal Retainer and Spacer {0679, 4051, 4201, 4251, 4267}
Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205} Thermal Spray Procedures for OHT Front Duo-Cone Seal Retainer {0679, 3259, 4201, 4205}
C175-16 Marine Engines Engine Oil Pressure - Test
2012/04/24 New Engine Software Is Used on Tier 4 Interim C9.3 Through C18 Industrial Engines {1901, 1902, 1920}
2012/03/28 New Oil Cooler Cover Gaskets and Torque Sequence Are Used on Certain C7 and 3126 Marine Engines {1378, 7555}
C175-16 Marine Engines Testing the Cooling System
3500 Generator Sets Coolant (ELC) - Change
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Coolant Level - Check