2011/11/21 Caterpillar


New Clamping for Water Lines on Certain 3600 and C280 Engines {1380}

Usage:

3608 6MC
Engine:
3606 (S/N: 8RB1-UP)
3608 (S/N: 6MC1-UP)
Marine Engine:
C280-6 (S/N: SCB1-UP; LDL1-UP)
C280-8 (S/N: PKA1-UP; NDT1-UP)
Engine News SEBD9731, 29 September 2011, "New Clamping for Water Lines on Certain 3600 and C280 Engines". The original article has been revised in order to change two of the effective serial numbers. No other information is different.

Description of Change: Bolted walling clamp assemblies have been added to the water tubes near the water terminal manifold. The new clamps are more resistant to vibration of the tubes. The improved clamping provides a better seal at the joint.

Adaptable To:




Illustration 1g02724788

Location of the new clamps

The new clamps have been added to improve sealing capability of the 2W-3340 Water Lines Gp. The part number of the water lines group has not changed.

The updated water lines group is adaptable to the above engines back to first production.

The updated water lines group is effective with the serial numbers listed in Table 2.

The part numbers of the new clamps and the hardware for the clamps are listed in Table 1. The quantities of the parts are for both water tubes.

Table 1
Clamps and Hardware    
Part     Qty    
124-6333 Clamp As     4    
0S-1571 Bolt     4    
0S-1588 Bolt     4    
5M-2894 Hard Washer     4    
7E-7209 Retaining Ring     2    
9S-8752 Full Nut     4    
9X-6458 Hard Washer     8    

Table 2
Effective Serial Numbers for the Updated Water Lines Group    
S/N:8RB01013    
S/N:6MC00804    
S/N:LDL00117    
S/N:SCB00120    
S/N:NDT00148    
S/N:PKA00159    

Caterpillar Information System:

2011/10/27 New Information Is Now Available for Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay On C280 Marine Engines {1408, 1451, 7451}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
C3.4B Industrial Engine Plate Locations and Film Locations - Aftertreatment
Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555} Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555}
320E and 323E Excavators Machine System Specifications Swing Drive Mounting
3406C Engines for Caterpillar Built Machines Engine Oil Pan
C280 Marine Engines Welding Precaution
C3.4B Engines For Caterpillar Built Machines Inlet Manifold Temperature Sensor - If equipped
C3.4B Engines For Caterpillar Built Machines Boost Pressure Sensor - If equipped
C3.4B Engines For Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451} Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Daily Inspection
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Storage
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electrical Connectors
C32 Auxiliary Engine Cold Weather Operation
C32 Marine Generator Set Overhaul (Top End)
320D and 323D Excavators Machine System Specifications Front Idler
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Gear and Bearing
C175-16 Marine Propulsion Engines Configuration Parameters
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Refrigerant Compressor
C7.1 Marine Propulsion Engine Speed/Timing Sensor
2011/11/29 A New Fuel Priming Pump with Serviceable Parts Is Used on C175-16 Engines {1258}
2012/03/23 A New Torque Converter Lip Seal is Available on Certain CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions {3105, 7555}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.