Swing Gear and Bearing
Show/hide table
| |
| Illustration 1 | g02724727 |
|
Typical example | |
Show/hide table
| Item | Qty | Part | Specification Description |
| - | - | - | Position "S" that is on inner race (12) relative to the carbody assembly (1) and bearing stopper (2). Refer to Illustration 1. |
| - | - | - | The five holes which are marked “3” are not for use. |
| 4 | 4 | 8T-4136 Bolt | Apply blue Loctite 242 to the threads.
Torque to |
| 5 | 8 | 8T-4136 Bolt | Apply blue Loctite 242 to the threads.
Torque to |
| 6 | 1 | 7Y-1650 Hose Clamp | Torque to |
| 7 | 2 | 8T-4137 Bolt | Apply blue Loctite 242 to the threads.
Torque to |
| 8 | 1 | 096-4902 Dowel | Apply Loctite C5A Cooper Anti-Seize to the dowel holes. |
| 9 | - | - | Apply blue Loctite High Flex GM between the mating surfaces of the gear group and upper frame assembly. Apply blue Loctite High Flex GM between the mating surfaces of the gear group and carbody assembly. |
| 10 | 37 | 461-3880 Bolt | Before assembly, remove Anti-seize, oil and dust from bolts, washers and female threads.
Then apply Loctite C5A Copper Anti-Seize compound. Torque to |
| 11 | 40 | 461-3879 Bolt | Before assembly, remove Anti-seize, oil and dust from bolts, washers and female threads.
Then apply Loctite C5A Copper Anti-Seize compound. Torque to |
Caterpillar Information System:
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
320D and 323D Excavators Machine System Specifications Front Idler
C32 Marine Generator Set Overhaul (Top End)
C32 Auxiliary Engine Cold Weather Operation
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electrical Connectors
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Storage
2011/11/21 New Clamping for Water Lines on Certain 3600 and C280 Engines {1380}
2011/10/27 New Information Is Now Available for Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay On C280 Marine Engines {1408, 1451, 7451}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
C3.4B Industrial Engine Plate Locations and Film Locations - Aftertreatment
Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555} Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555}
320E and 323E Excavators Machine System Specifications Swing Drive Mounting
C175-16 Marine Propulsion Engines Configuration Parameters
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Refrigerant Compressor
C7.1 Marine Propulsion Engine Speed/Timing Sensor
2011/11/29 A New Fuel Priming Pump with Serviceable Parts Is Used on C175-16 Engines {1258}
2012/03/23 A New Torque Converter Lip Seal is Available on Certain CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions {3105, 7555}
2011/10/11 New Software for Product Link (PL300) Is Now Available {7606, 7620}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
320E and 323E Excavators Machine System Specifications Pump Coupling
C3.4B Engines Diesel Particulate Filter Has Differential Pressure Problem
320E and 323E Excavators Machine System Specifications Main Control Valve
CX31 On-Highway Transmission Transmission Planetary - Disassemble
CX31 On-Highway Transmission Transmission Planetary - Assemble