Plate Locations and Film Locations - Aftertreatment
Wall Flow Diesel Particulate Filter (DPF)
Show/hide table
Illustration 1 | g02475495 |
Typical example |
The serial number for identifying the aftertreatment will be in two locations. On the DPF in position (1) and in position (2). On the end cover of the inlet to the DPF.
Show/hide table
Illustration 2 | g02723697 |
(1) Serial numbers on main body
(2) Serial numbers on inlet end cover |
Ensure that all numbers on the aftertreatment are recorded.
Your Cat dealer will require all the numbers in order to identify the components for your aftertreatment.
Caterpillar Information System:
Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555} Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555}
320E and 323E Excavators Machine System Specifications Swing Drive Mounting
3406C Engines for Caterpillar Built Machines Engine Oil Pan
C280 Marine Engines Welding Precaution
C3.4B Engines For Caterpillar Built Machines Inlet Manifold Temperature Sensor - If equipped
C3.4B Engines For Caterpillar Built Machines Boost Pressure Sensor - If equipped
C3.4B Engines For Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451} Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Daily Inspection
2011/10/10 Updated Engine Software Is Now Used for Certain C15 Petroleum Generator Set Engines {1901, 1920}
2011/09/29 A Procedure is Now Used to Install Mounting Blocks for the Auxiliary Lines on Sticks for Certain Excavators {0679, 6502}
Fundamentals of Arc Spray for Reconditioning Components {0679} Fundamentals of Arc Spray for Reconditioning Components {0679}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
2011/10/27 New Information Is Now Available for Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay On C280 Marine Engines {1408, 1451, 7451}
2011/11/21 New Clamping for Water Lines on Certain 3600 and C280 Engines {1380}
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Storage
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electrical Connectors
C32 Auxiliary Engine Cold Weather Operation
C32 Marine Generator Set Overhaul (Top End)
320D and 323D Excavators Machine System Specifications Front Idler
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Gear and Bearing
C175-16 Marine Propulsion Engines Configuration Parameters
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Refrigerant Compressor