Updated Engine Software Is Now Used for Certain C15 Petroleum Generator Set Engines {1901, 1920}
- Petroleum Engine:
- C15 PET GS ENG (S/N: PET1-UP)
Description of Change: New engine software is now used. Updated software performance maps with advanced timing maps, and effective governing at all coolant temperatures are also included within the new engine software.
Adaptable To: Refer to Table 1 for the correct software part numbers.
Show/hide table
| New Software Part Number | Former Software Part Number |
| 376-2334 | 318-1901 |
| 376-2386 | 318-1903 |
Caterpillar Information System:
2011/09/29 A Procedure is Now Used to Install Mounting Blocks for the Auxiliary Lines on Sticks for Certain Excavators {0679, 6502}
Fundamentals of Arc Spray for Reconditioning Components {0679} Fundamentals of Arc Spray for Reconditioning Components {0679}
C3.4B Industrial Engine Balancer
C3.4B Engines For Caterpillar Built Machines Oxygen Sensor
2011/09/28 Installing A New Oil Pan Seal and Mounting Hardware on Certain Trucks Equipped with C11 and C13 Engines {1302, 7553, 7555}
2011/09/29 Installing A New Oil Pan Seal and Mounting Hardware on Certain C11, C12, and C13 Engines {1302, 7553, 7555}
2011/09/27 Special Instructions Are Available on Retrofitting G3508 and G3512 Engines for Ultra Lean Burn {1000, 775E}
Cat® Detect Object Detection System MID 134 - CID 3336 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 3336 - FMI 03
Cat® Detect Object Detection System MID 134 - CID 3335 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 3335 - FMI 03
Cat® Detect Object Detection System MID 134 - CID 3334 - FMI 04
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Daily Inspection
Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451} Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451}
C3.4B Engines For Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C3.4B Engines For Caterpillar Built Machines Boost Pressure Sensor - If equipped
C3.4B Engines For Caterpillar Built Machines Inlet Manifold Temperature Sensor - If equipped
C280 Marine Engines Welding Precaution
3406C Engines for Caterpillar Built Machines Engine Oil Pan
320E and 323E Excavators Machine System Specifications Swing Drive Mounting
Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555} Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555}
C3.4B Industrial Engine Plate Locations and Film Locations - Aftertreatment
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
2011/10/27 New Information Is Now Available for Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay On C280 Marine Engines {1408, 1451, 7451}