Balancer
Show/hide table
| |
| Illustration 1 | g02727673 |
|
Typical example | |
Tighten the bolts in the sequence that is shown in illustration 1 to the following torque. ...
Backlash values
- Backlash between the balancer gears ...
0.075 to 0.165 mm (0.00295 to 0.00650 inch)
- Backlash between the balancer gear and the crankshaft gear ...
0.110 to 0.210 mm (0.00433 to 0.00827 inch)
Caterpillar Information System:
C3.4B Engines For Caterpillar Built Machines Oxygen Sensor
2011/09/28 Installing A New Oil Pan Seal and Mounting Hardware on Certain Trucks Equipped with C11 and C13 Engines {1302, 7553, 7555}
2011/09/29 Installing A New Oil Pan Seal and Mounting Hardware on Certain C11, C12, and C13 Engines {1302, 7553, 7555}
2011/09/27 Special Instructions Are Available on Retrofitting G3508 and G3512 Engines for Ultra Lean Burn {1000, 775E}
Cat® Detect Object Detection System MID 134 - CID 3336 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 3336 - FMI 03
Cat® Detect Object Detection System MID 134 - CID 3335 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 3335 - FMI 03
Cat® Detect Object Detection System MID 134 - CID 3334 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 3334 - FMI 03
Cat® Detect Object Detection System MID 134 - CID 3333 - FMI 04
Cat® Detect Object Detection System MID 134 - CID 3333 - FMI 03
Fundamentals of Arc Spray for Reconditioning Components {0679} Fundamentals of Arc Spray for Reconditioning Components {0679}
2011/09/29 A Procedure is Now Used to Install Mounting Blocks for the Auxiliary Lines on Sticks for Certain Excavators {0679, 6502}
2011/10/10 Updated Engine Software Is Now Used for Certain C15 Petroleum Generator Set Engines {1901, 1920}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Daily Inspection
Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451} Installation Procedure for the Workover Rig Instrument Panel Kits for C9, C11, C13, and C15 Engines with TH31 / TH35 and CX31 / CX35 Transmissions in 12 Volt and 24 Volt Applications{7451}
C3.4B Engines For Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C3.4B Engines For Caterpillar Built Machines Boost Pressure Sensor - If equipped
C3.4B Engines For Caterpillar Built Machines Inlet Manifold Temperature Sensor - If equipped
C280 Marine Engines Welding Precaution
3406C Engines for Caterpillar Built Machines Engine Oil Pan
320E and 323E Excavators Machine System Specifications Swing Drive Mounting
Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555} Procedure to Replace Torque Converter Lip Seal on CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions{3105, 7555}