Refrigerant Compressor
Show/hide table
图 1 | g03177083 |
Show/hide table
320-1291 制冷剂压缩机总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 1     | 7T-4532 螺塞组件     | 机油排放塞处于加压状态。 拧紧至扭矩为 19.6 ± 4.9 N·m (173.5 ± 43.4 lb in)。     |
2     | 2     | -     | 管路组装期间,将螺母拧紧至扭矩为 21 ± 3 N·m (186 ± 27 lb in)。     |
-     | -     | -     | 压缩机的技术规格:     |
孔径为 29.3 mm (1.2 in)。 |
|||
行程为 32.8 mm (1.3 in)。 |
|||
每圈排量为 154.9 cc (9.45200 cu. in)。 |
|||
气缸数为 7。 | |||
制冷剂为 R134a。 | |||
旋转方向为顺时针方向。 | |||
-     | -     | -     | 离合器的规格:     |
电压为 24 VDC。 | |||
起步扭矩为 34.4 N·m (25 lb ft)。 |
|||
离合器接合的最小电压为 16 VDC。 | |||
20 °C 温度下的线圈电阻为 17.6 ± 0.6 欧姆。 | |||
20 °C 温度下的最大电流为 1.42 安培。 | |||
皮带轮类型为 PV 8。 |
Show/hide table
图 2 | g03177120 |
Show/hide table
项目     | 数量     | 零件     | 技术规格说明     |
3     | 3     | 101-7178 螺栓     | 拧紧至扭矩为 44 N·m (32 lb ft)。     |
4     | 2     | 127-3361 螺栓     | 拧紧至扭矩为 22 N·m (16 lb ft)。     |
5     | 2     | 346-2999 螺栓     | 拧紧至扭矩为 22 N·m (16 lb ft)。     |
Caterpillar Information System:
C175-16 Marine Propulsion Engines Configuration Parameters
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Gear and Bearing
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562} 1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
320D and 323D Excavators Machine System Specifications Front Idler
C32 Marine Generator Set Overhaul (Top End)
C32 Auxiliary Engine Cold Weather Operation
3516B and 3516C Engines For MT4400D AC Off-Highway Trucks Electrical Connectors
3512C and 3516C Marine Auxiliary and Generator Set Engines Product Storage
2011/11/21 New Clamping for Water Lines on Certain 3600 and C280 Engines {1380}
2011/10/27 New Information Is Now Available for Modifying the Control Panel Remote Start Circuit Wiring of the Crank Rest Time Delay Relay On C280 Marine Engines {1408, 1451, 7451}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280} 284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
C3.4B Industrial Engine Plate Locations and Film Locations - Aftertreatment
C7.1 Marine Propulsion Engine Speed/Timing Sensor
2011/11/29 A New Fuel Priming Pump with Serviceable Parts Is Used on C175-16 Engines {1258}
2012/03/23 A New Torque Converter Lip Seal is Available on Certain CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions {3105, 7555}
2011/10/11 New Software for Product Link (PL300) Is Now Available {7606, 7620}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
320E and 323E Excavators Machine System Specifications Pump Coupling
C3.4B Engines Diesel Particulate Filter Has Differential Pressure Problem
320E and 323E Excavators Machine System Specifications Main Control Valve
CX31 On-Highway Transmission Transmission Planetary - Disassemble
CX31 On-Highway Transmission Transmission Planetary - Assemble
CX31 On-Highway Transmission Torque Converter Housing - Remove
CX31 On-Highway Transmission Torque Converter - Remove