Torque Converter Housing - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1U-9200 | Lever Puller Hoist Gp | 1 |
B | 138-7575 | Link Bracket | 3 |
Start By:
- Remove the gear pump. Refer to Disassembly and Assembly , "Gear Pump (Torque Converter and Transmission) - Remove".
- Remove the torque converter. Refer to Disassembly and Assembly , "Torque Converter - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove lip seal (1).
Show/hide table
Illustration 2 g02395876 - Disconnect harness assembly (2).
Show/hide table
Illustration 3 g02395878 - Disconnect harness assembly (3) and remove the connecting hardware.
Show/hide table
Illustration 4 g02395880 Show/hide tableIllustration 5 g02395917 - Attach Tooling (A), Tooling (B), and a suitable lifting device onto torque converter housing (4). The weight of torque converter housing (4) is approximately
79 kg (175 lb) . - Remove bolts (5) and bolt (6).
- Remove torque converter housing (4).
Show/hide table
Illustration 6 g02395936 - Remove seal (7).
Show/hide table
Illustration 1 | g02395857 |
Caterpillar Information System:
CX31 On-Highway Transmission Transmission Planetary - Assemble
CX31 On-Highway Transmission Transmission Planetary - Disassemble
320E and 323E Excavators Machine System Specifications Main Control Valve
C3.4B Engines Diesel Particulate Filter Has Differential Pressure Problem
320E and 323E Excavators Machine System Specifications Pump Coupling
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
2011/10/11 New Software for Product Link (PL300) Is Now Available {7606, 7620}
2012/03/23 A New Torque Converter Lip Seal is Available on Certain CX31 and CX35 On-Highway Transmissions and CX31-P600 and CX35-P800 Petroleum Transmissions {3105, 7555}
2011/11/29 A New Fuel Priming Pump with Serviceable Parts Is Used on C175-16 Engines {1258}
C7.1 Marine Propulsion Engine Speed/Timing Sensor
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Refrigerant Compressor
C175-16 Marine Propulsion Engines Configuration Parameters
CX31 On-Highway Transmission Torque Converter - Remove
CX31 On-Highway Transmission Torque Converter - Disassemble
CX31 On-Highway Transmission Torque Converter - Assemble
CX31 On-Highway Transmission Torque Converter - Install
CX31 On-Highway Transmission Retarder - Remove
CX31 On-Highway Transmission Retarder - Disassemble
CX31 On-Highway Transmission Retarder - Assemble
CX31 On-Highway Transmission Retarder - Install
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Remove
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Disassemble
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Assemble
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Install