Retarder - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 3 |
Start By:
- Remove the torque converter housing. Refer to Disassembly and Assembly, "Torque Converter Housing - Remove".
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove seal rings (1). Remove bearing (2). Remove thrust bearing (3). Use Tooling (A) and a suitable lifting device in order to remove retarder (4). The weight of retarder (4) is approximately
40 kg (88 lb) .Show/hide tableIllustration 2 g01846054 - Remove seal (5).
- If necessary, remove studs (6).
Show/hide table
Illustration 1 | g01845434 |
Caterpillar Information System:
CX31 On-Highway Transmission Torque Converter - Install
CX31 On-Highway Transmission Torque Converter - Assemble
CX31 On-Highway Transmission Torque Converter - Disassemble
CX31 On-Highway Transmission Torque Converter - Remove
CX31 On-Highway Transmission Torque Converter Housing - Remove
CX31 On-Highway Transmission Transmission Planetary - Assemble
CX31 On-Highway Transmission Transmission Planetary - Disassemble
320E and 323E Excavators Machine System Specifications Main Control Valve
C3.4B Engines Diesel Particulate Filter Has Differential Pressure Problem
320E and 323E Excavators Machine System Specifications Pump Coupling
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280} 284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
2011/10/11 New Software for Product Link (PL300) Is Now Available {7606, 7620}
CX31 On-Highway Transmission Retarder - Disassemble
CX31 On-Highway Transmission Retarder - Assemble
CX31 On-Highway Transmission Retarder - Install
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Remove
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Disassemble
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Assemble
CX31 On-Highway Transmission Retarder Hydraulic Control Valve - Install
CX31 On-Highway Transmission Oil Filter and Base (Power Train) - Remove and Install
CX31 On-Highway Transmission Control Manifold - Remove
CX31 On-Highway Transmission Control Manifold - Disassemble
CX31 On-Highway Transmission Control Manifold - Assemble
CX31 On-Highway Transmission Control Manifold - Install