CX31 On-Highway Transmission Caterpillar

Torque Converter - Install

Usage:

CX31 EBW

Show/hide table

Table 1
Required Tools
Tool	Part Number	Part Description	Qty
A	350-4401	Adapter Plate	1
B	4-34614	Hoist Ring Columbus McKinnon Corporation	2
C	1U-9200	Lever Puller Hoist	1
D	1U-5750	Engine Stand	1
D	1P-2850	Oil Drain Cart	1
E	138-7575	Link Bracket	3

Show/hide table

Use Tooling (E) and a suitable lifting device in order to install torque converter (5). The weight of torque converter (5) is approximately 125 kg (275 lb).
Note: Ensure that the torque converter adapter is clean. Apply a thin film of clean transmission oil onto the torque converter adapter. Ensure that the splines are aligned. Gently install torque converter (5).
Show/hide table

Illustration 2 g02453449

Show/hide table

Illustration 3 g02453445
Install bolt (4). Tighten bolt (4) to a torque of 285 ± 15 N·m (210 ± 11 lb ft).
Install plug (3). Tighten plug (3) to a torque of 285 ± 15 N·m (210 ± 11 lb ft).
Show/hide table

Illustration 4 g02453432

Show/hide table

Illustration 5 g02453439

Show/hide table

Illustration 6 g02453443
Use Tooling (D) in order to position the transmission horizontally. Attach Tooling (B), Tooling (C), and a suitable lifting device onto transmission and torque converter (2). The weight of transmission and torque converter (2) is approximately 544 kg (1200 lb). The weight of transmission and torque converter (2) with a retarder is approximately 590 kg (1300 lb).
Remove transmission and torque converter (2) from Tooling (D).
Show/hide table

Illustration 7 g02378306
Remove Tooling (A) from the transmission housing.
Show/hide table

Illustration 8 g02453418
Install bracket (1).