Flywheel - Inspect
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 8T-5096     | 千分表总成     | 1     |
飞轮端面直线度
Show/hide table
图 1 | g01334421 |
典型示例 |
- 如图 1 中所示,安装工具 (A) 。
- 将千分表指针设在 0 mm (0 in)。
- 转动飞轮。 每隔 45 度读取千分表读数。
注: 检查过程中,向发动机前部持续按压曲轴,消除所有端隙。
- 计算四个位置的最小测量值与最大测量值之差。 对于每隔 25 mm (1.0 in) 的飞轮半径,这个差值不能高于 0.03 mm (0.001 in)。 飞轮半径的测量是在曲轴轴线与千分表接触点之间进行的。
飞轮跳动量
Show/hide table
图 2 | g01334422 |
典型示例 |
- 如图 2 中所示,安装工具 (A) 。
- 将千分表指针设在 0 mm (0 in)。
- 转动飞轮。 每隔 45 度读取千分表读数。
- 计算四个位置的最小测量值与最大测量值之差。 这个差值不能高于 0.30 mm (0.012 in)。
Caterpillar Information System:
C3.4B Engines for Caterpillar Built Machines Turbocharger - Inspect
3500C Marine Engines Fuel Injector Mechanism
C7 Engines for Caterpillar Built Machines Camshaft
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Configuration - Check
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Troubleshooting
C9 Industrial Engines Refill Capacities
Vane Type Hydraulic Pump Identification Guidelines {5055} Vane Type Hydraulic Pump Identification Guidelines {5055}
2011/05/25 New Software Is Available for Certain C13 Industrial Engines {1901, 1920}
390F Excavator Machine System Bucket Linkage
C7 Engines for Caterpillar Built Machines Valve Mechanism
C9 Industrial Engines Fuel System - Prime
C9 Industrial Engines Engine Oil and Filter - Change
C3.4B Engines for Caterpillar Built Machines Flywheel Housing - Inspect
C3.4B Engines for Caterpillar Built Machines V-Belt - Test
C3.4B Engines for Caterpillar Built Machines Fuel System - Prime
C3.4B Engines for Caterpillar Built Machines Piston Height - Inspect
2011/05/12 New Software Is Now Released for Product Link PL522/523 Systems On All Cat Product {7606}
2011/07/18 New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2012/01/16 Special Instruction, REHS7131 , "Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE)" Is Available {1408, 1439, 191N, 7400}
DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400} DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400}
C9 Industrial Engines Configuration Parameters
C9 Industrial Engines Aftercooler Core - Inspect/Clean/Test
Cat® Alarm and Protection System Control Panel Overview (RP 410)
C9.3 Engine for Caterpillar Built Machines Water Pump