Fuel Injector Mechanism
Show/hide table
| |
| 图 1 | g02529456 |
Show/hide table
| 技术规格 - 332-9690 气门机构总成和 308-5356 气门机构总成 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| B | 1 | 230-2620 衬套 | 安装后衬套上的摇臂轴孔径为 |
| 1 | 1 | 317-1121 安全螺母 | 拧紧至扭矩为 |
| C | 1 | 234-2273 摇臂轴 | 摇臂轴的直径为 |
| 2 | 1 | 6J-2245 O 形密封圈 | 用清洁发动机机油稍微润滑 O 形密封圈的孔。 |
| 3 | 1 | 7E-6508 盖组件 | 拧紧盖组件的固定螺母至 用手开始拧紧盖组件的固定螺母，使接线柱不至出现螺纹交错。 |
| 4 | 1 | 100-3878 喷油器弹簧 | 测试力下的长度为 测试力为 测试后的自由长度为 |
| D | 1 | 282-7944 喷油器挺杆组件 | 单体喷油器挺杆组件的直径为 缸盖上的单体喷油器挺杆组件孔径为 |
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Camshaft
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Configuration - Check
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Troubleshooting
C9 Industrial Engines Refill Capacities
Vane Type Hydraulic Pump Identification Guidelines {5055} Vane Type Hydraulic Pump Identification Guidelines {5055}
2011/05/25 New Software Is Available for Certain C13 Industrial Engines {1901, 1920}
390F Excavator Machine System Bucket Linkage
C7 Engines for Caterpillar Built Machines Valve Mechanism
C9 Industrial Engines Fuel System - Prime
C9 Industrial Engines Engine Oil and Filter - Change
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
TA19 Transmission Pressure Sensor (Transmission Oil) - Remove and Install
C3.4B Engines for Caterpillar Built Machines Turbocharger - Inspect
C3.4B Engines for Caterpillar Built Machines Flywheel - Inspect
C3.4B Engines for Caterpillar Built Machines Flywheel Housing - Inspect
C3.4B Engines for Caterpillar Built Machines V-Belt - Test
C3.4B Engines for Caterpillar Built Machines Fuel System - Prime
C3.4B Engines for Caterpillar Built Machines Piston Height - Inspect
2011/05/12 New Software Is Now Released for Product Link PL522/523 Systems On All Cat Product {7606}
2011/07/18 New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2012/01/16 Special Instruction, REHS7131 , "Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE)" Is Available {1408, 1439, 191N, 7400}
DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400} DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400}
C9 Industrial Engines Configuration Parameters
C9 Industrial Engines Aftercooler Core - Inspect/Clean/Test