Bucket Linkage
Show/hide table
| |
| Illustration 1 | g03655842 |
|
Typical example | |
Show/hide table
| Specification for 308-8734 Bucket Linkage Gp and 308-8738 Bucket Linkage Gp | |||
| Item | Qty | Part | Specification Description |
| - | Coat all bores for the pins with 5P-0960 Grease Cartridge. | ||
| 1 | - | - | When assembling the linkage group, rotate the rod end of the bucket cylinder in order to position the grease fitting away from the stick. |
| 2 | 1 | 441-0041 Pin As | Diameter is |
| 3 | 1 | 367-1460 Pin As | Diameter is |
| 4 | 1 | 332-5029 Pin As | Diameter is |
| 5 | 1 | 195-5481 Pin As | Diameter is |
| 6 | 4 | 9X-4600 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 7 | 2 | 9X-4599 Lip Type Seal | Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss. |
| 8 | 2 | 7Y-9915 Bushing | Before assembly bore is Installation depth is |
| 9 | 2 | 198-5529 Bushing | Before assembly bore is Installation depth is |
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Valve Mechanism
C9 Industrial Engines Fuel System - Prime
C9 Industrial Engines Engine Oil and Filter - Change
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
TA19 Transmission Pressure Sensor (Transmission Oil) - Remove and Install
Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057} Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057}
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT - Test
C9 Industrial Engines Product Lifting
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for MUTEN-MUTON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for DCHEN-DCHON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSNEN-CSNON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSIEN-CSION-CSPEN Circuit Board - Replace
2011/05/25 New Software Is Available for Certain C13 Industrial Engines {1901, 1920}
Vane Type Hydraulic Pump Identification Guidelines {5055} Vane Type Hydraulic Pump Identification Guidelines {5055}
C9 Industrial Engines Refill Capacities
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Troubleshooting
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Configuration - Check
C7 Engines for Caterpillar Built Machines Camshaft
3500C Marine Engines Fuel Injector Mechanism
C3.4B Engines for Caterpillar Built Machines Turbocharger - Inspect
C3.4B Engines for Caterpillar Built Machines Flywheel - Inspect
C3.4B Engines for Caterpillar Built Machines Flywheel Housing - Inspect
C3.4B Engines for Caterpillar Built Machines V-Belt - Test
C3.4B Engines for Caterpillar Built Machines Fuel System - Prime