Valve Mechanism
Show/hide table
Illustration 1 | g02527116 |
Front view |
Show/hide table
Specification for 232-3717 Valve Mechanism Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 256-3832 Rocker Arm As | Bore in the rocker arm assembly for rocker arm shaft |
Apply 8T-2998 Lubricant to the sockets of the rocker arms. | |||
1 | 256-3835 Rocker Arm As | Bore in the rocker arm for the rocker arm assembly |
|
Apply 8T-2998 Lubricant to the sockets of the rocker arms. | |||
2 | 1 | 138-7198 Shaft As | Diameter is |
3 | 1 | 2Y-5829 Nut | Torque to |
4 | 1 | 7E-6793 Injection Lifter Arm | Bore in the injection lifter arm for the lifter shaft assembly |
139-9476 Lifter Shaft Assembly | Diameter is |
||
5 | - | - | The valve lifter groups must be installed with the oil holes in the lifter shaft, as shown. The oil holes should face toward the side cover of the engine block. |
6 | 12 | 8T-8442 Bolt | Apply blue Loctite 242 to the threads. Tighten the bolts in a numerical sequence that is shown in Illustration 1 for each valve lifter group. |
Torque to |
|||
B | - | - | Dimensions for the valve lash:
1. Valve lash for inlet is 2. Valve lash for exhaust is |
C | - | 5B-1866 Cup Plug | Installation depth is |
Show/hide table
Illustration 2 | g02527317 |
Right side view |
Show/hide table
Item | Qty | Part | Specification Description |
7 | 5 | 137-6717 Spring | Length under test force Test force is Approximate free length is |
8 | 2 | 8T-0100 Bolt | Tighten the bolts in a numerical sequence that is shown in Illustration 2. |
9 | 11 | 6V-5696 Bolt |
Caterpillar Information System:
C9 Industrial Engines Fuel System - Prime
C9 Industrial Engines Engine Oil and Filter - Change
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
TA19 Transmission Pressure Sensor (Transmission Oil) - Remove and Install
Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057} Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057}
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT - Test
C9 Industrial Engines Product Lifting
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for MUTEN-MUTON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for DCHEN-DCHON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSNEN-CSNON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSIEN-CSION-CSPEN Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Component Location
390F Excavator Machine System Bucket Linkage
2011/05/25 New Software Is Available for Certain C13 Industrial Engines {1901, 1920}
Vane Type Hydraulic Pump Identification Guidelines {5055} Vane Type Hydraulic Pump Identification Guidelines {5055}
C9 Industrial Engines Refill Capacities
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Troubleshooting
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Configuration - Check
C7 Engines for Caterpillar Built Machines Camshaft
3500C Marine Engines Fuel Injector Mechanism
C3.4B Engines for Caterpillar Built Machines Turbocharger - Inspect
C3.4B Engines for Caterpillar Built Machines Flywheel - Inspect
C3.4B Engines for Caterpillar Built Machines Flywheel Housing - Inspect
C3.4B Engines for Caterpillar Built Machines V-Belt - Test