TA19 Transmission Caterpillar


Pressure Sensor (Transmission Oil) - Remove and Install

Usage:

TA19-M4WD XAE

Removal Procedure




    Illustration 1g02525876

    Shows location of pressure sensor (1) .




    Illustration 2g02525961

  1. Remove clip (2) and disconnect harness assembly (3) .

  1. Remove pressure sensor (1) .

Installation Procedure

  1. Install pressure sensor (1) in the reverse order of the removal.

    1. Tighten pressure sensor (1) to a torque of 10 ± 2 N·m (89 ± 18 lb in).

Caterpillar Information System:

Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057} Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057}
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT - Test
C9 Industrial Engines Product Lifting
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for MUTEN-MUTON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for DCHEN-DCHON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSNEN-CSNON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSIEN-CSION-CSPEN Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Component Location
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz General Information
TA19 Transmission Speed Sensor (Transmission Input) - Remove and Install
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators End User License Agreement
TA19 Transmission Speed Sensor (Transmission Output) - Remove and Install
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
C9 Industrial Engines Engine Oil and Filter - Change
C9 Industrial Engines Fuel System - Prime
C7 Engines for Caterpillar Built Machines Valve Mechanism
390F Excavator Machine System Bucket Linkage
2011/05/25 New Software Is Available for Certain C13 Industrial Engines {1901, 1920}
Vane Type Hydraulic Pump Identification Guidelines {5055} Vane Type Hydraulic Pump Identification Guidelines {5055}
C9 Industrial Engines Refill Capacities
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Troubleshooting
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Configuration - Check
C7 Engines for Caterpillar Built Machines Camshaft
3500C Marine Engines Fuel Injector Mechanism
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.