Speed Sensor (Transmission Input) - Remove and Install
Removal Procedure
- Disconnect harness assembly (4) and remove clip assembly (1) .
Show/hide table
 | |
| Illustration 1 | g02525179 |
- Remove bracket (2) and remove input speed sensor (3) .
- Remove O-ring seal (5) from input speed sensor (3) .
Show/hide table
 | |
| Illustration 2 | g02525236 |
Installation Procedure
- Install input speed sensor (3) in the reverse order of removal.
- Lubricate O-ring seal (5) with the lubricant that is being sealed prior to installation.
Caterpillar Information System:
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators End User License Agreement
TA19 Transmission Speed Sensor (Transmission Output) - Remove and Install
3516C Generator Sets Fuel Injector - Inspect/Adjust
330F MHPU Mobile Hydraulic Power Unit Machine System Control Valve (Boom Lowering) - Manual
C9 Industrial Engines Product Description
TA19 Transmission Temperature Sensor (Transmission Oil) - Remove and Install
C15 Petroleum Engines Cat Data Link - Test
320E and 323E Excavators Equipment Lowering with Engine Stopped
C18 Marine Engine Cooling System - Test
C3.4B Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C3.4B Industrial Engine Fuel System - Prime
C15 and C18 Tier 4 Final Engines Belts - Adjust - If Equipped
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz General Information
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Component Location
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSIEN-CSION-CSPEN Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for CSNEN-CSNON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for DCHEN-DCHON Circuit Board - Replace
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT for MUTEN-MUTON Circuit Board - Replace
C9 Industrial Engines Product Lifting
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz IGBT - Test
Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057} Installation Procedure for 374-5523 Stick Lines Gp on Certain Hydraulic Excavators {5057}
TA19 Transmission Pressure Sensor (Transmission Oil) - Remove and Install
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709} 146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
C9 Industrial Engines Engine Oil and Filter - Change