Special Instruction, REHS7131 , "Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE)" Is Available {1408, 1439, 191N, 7400}
- Engine:
- G3408C (S/N: BAZ1-UP)
- Petroleum Engine:
- G3520B PETROLEUM (S/N: TPC1-UP)
- G3412C (S/N: 6ZM1-UP)
- G3508 (S/N: WPN1-UP)
- G3508B (S/N: RBK1-UP)
- G3512 (S/N: WPP1-UP; WPR1-UP)
- G3512B (S/N: JHH1-UP)
- G3516 (S/N: 4EK1-UP; WPT1-UP; WPW1-UP)
- G3516B (S/N: JEF1-UP)
- G3520B (S/N: GLF1-UP)
Special Instruction, REHS7131 provides the installation procedure for the new 372-1187 Nitrogen Oxide Sensor Gp. The Special Instruction also provides the procedure for the installation of the new 379-0138 Sensor Kit (NITROGEN OXIDE). Use the sensor kit when you are replacing the 304-4209 Nitrogen Oxide Sensor Gp. The kit contains longer button head screws and spacers that are needed to accommodate for the profile change in the buffer for the new sensor.
For this sensor, proper routing and securing of the wiring harness is essential. Be sure to follow the procedure closely in order to avoid premature failure of the sensor group.
Effectivity for the new sensor group is listed below:
Show/hide table
| Effectivity for the 372-1187 Nitrogen Oxide Sensor Group |
| S/N:BAZ02909-UP |
| S/N:6ZM02984-UP |
| S/N:WPN01654-UP |
| S/N:RBK01059-UP |
| S/N:WPP01565-UP |
| S/N:WPR01612-UP |
| S/N:JHH01013-UP |
| S/N:4EK05293-UP |
| S/N:WPT01559-UP |
| S/N:WPW02910-UP |
| S/N:JEF01278-UP |
| S/N:GLF00127-UP |
| S/N:TPC01002-UP |
Caterpillar Information System:
2011/07/18 New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/05/12 New Software Is Now Released for Product Link PL522/523 Systems On All Cat Product {7606}
C3.4B Engines for Caterpillar Built Machines Piston Height - Inspect
C3.4B Engines for Caterpillar Built Machines Fuel System - Prime
C3.4B Engines for Caterpillar Built Machines V-Belt - Test
C3.4B Engines for Caterpillar Built Machines Flywheel Housing - Inspect
C3.4B Engines for Caterpillar Built Machines Flywheel - Inspect
C3.4B Engines for Caterpillar Built Machines Turbocharger - Inspect
3500C Marine Engines Fuel Injector Mechanism
C7 Engines for Caterpillar Built Machines Camshaft
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Configuration - Check
UPSB125 Uninterruptible Power Supply UPS Battery - 50Hz Troubleshooting
DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400} DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400}
C9 Industrial Engines Configuration Parameters
C9 Industrial Engines Aftercooler Core - Inspect/Clean/Test
Cat® Alarm and Protection System Control Panel Overview (RP 410)
C9.3 Engine for Caterpillar Built Machines Water Pump
3500B and 3500C Marine Engines Camshaft
C15 Petroleum Engines Turbocharger
Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE){191N} Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE){191N}
797F and 797F XQ Off-Highway Truck Braking System Control Valve (Brake) - If Equipped
3500 Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
3406C Industrial Engine Air Compressor - Check