Control Valve (Brake) - If Equipped
Show/hide table
Illustration 1 | g03830632 |
Show/hide table
Specifications for 285-5630 Brake Control Valve Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 2 | 294-9050 Shuttle Valve Gp | Torque to |
2 | 1 | 285-5629 Solenoid Valve Gp | Torque to |
3 | 1 | 156-5970 Nut | Torque to |
4 | 1 | 371-5992 Relief Valve Gp | Torque to |
5 | 1 | - | Tighten the nut to |
6 | 1 | 424-0342 Control Valve Gp | Torque to |
7 | 1 | 294-9049 Solenoid Valve Gp | Torque to |
8 | 1 | 156-5970 Nut | Torque to |
9 | 3 | 279-6527 Solenoid Valve Gp | Torque to |
10 | 3 | - | Tighten the nut to |
11 | 2 | 163-1829 Check Valve Gp | Torque to |
12 | 1 | 294-9047 Pressure Reducing Valve Gp | Torque to |
13 | 1 | - | Tighten the nut to |
14 | 1 | 343-3181 Diverter Valve Gp | Torque to |
15 | 1 | 371-4188 Control Valve Gp | Torque to |
16 | 1 | 294-9048 Valve Cartridge As | Torque to |
17 | 1 | 156-5970 Nut | Torque to |
18 | 1 | 262-1956 Solenoid Valve Gp | Torque to |
19 | 1 | 343-3185 Diverter Valve Gp | Torque to |
Caterpillar Information System:
Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE){191N} Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE){191N}
C15 Petroleum Engines Turbocharger
3500B and 3500C Marine Engines Camshaft
C9.3 Engine for Caterpillar Built Machines Water Pump
Cat® Alarm and Protection System Control Panel Overview (RP 410)
C9 Industrial Engines Aftercooler Core - Inspect/Clean/Test
C9 Industrial Engines Configuration Parameters
DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400} DPF Temperature Sensor Thread Salvage Procedure for Certain C7 thru C15 On-Highway Engines{108F, 1439, 1919, 7400}
2012/01/16 Special Instruction, REHS7131 , "Procedure for the Installation of the 372-1187 Nitrogen Oxide Sensor Gp and the 379-0138 Sensor Kit (NITROGEN OXIDE)" Is Available {1408, 1439, 191N, 7400}
2011/07/18 New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/05/12 New Software Is Now Released for Product Link PL522/523 Systems On All Cat Product {7606}
C3.4B Engines for Caterpillar Built Machines Piston Height - Inspect
3500 Engines Camshaft
C13, C15, and C18 Tier 4 Final Engines Cylinder Block
3406C Industrial Engine Air Compressor - Check
UPSB220 Uninterruptible Power Supply Basic Preventive Maintenance
C9 Industrial Engines Belts - Inspect/Adjust/Replace
UPSB220 Uninterruptible Power Supply Unit Initial Check
UPSB220 Uninterruptible Power Supply Metering - Check
UPSB220 Uninterruptible Power Supply System Shutdown
UPSB220 Uninterruptible Power Supply Configuration - Check
UPSB220 Uninterruptible Power Supply Cabinet - Check
UPSB220 Uninterruptible Power Supply Advanced Preventive Maintenance
UPSB220 Uninterruptible Power Supply System Startup