Safety Messages
请熟悉所有的安全标志。
请确保所有的安全标志都清晰易读。 如果字迹模糊难读就应清洗或更换此安全标志。 如果无法辨识图示,更换图示。 清洗安全标志时要使用布、水和肥皂。 请勿使用溶剂、汽油或其他烈性化学制剂清洗安全标志。 这些清洁溶剂可能会使粘贴标志用的粘着剂丧失粘性。 并进而导致安全标志从发动机上脱落。
更换任何已损坏或丢失的安全标志。 如果贴有安全标志的零件需要更换,请在更换零件上贴上安全标志。 任何 Cat 代理商都可以提供新的安全标志。
Show/hide table
图 1 | g03127219 |
(1) 通用警告贴膜 |
该安全标志位于插图 1 中所示变速箱顶部。
Show/hide table
图 2 | g01370904 |
Show/hide table
在阅读和了解⟪操作和保养手册⟫中的指示和警告之前,请勿操作机器。 不遵守这些警告,可能会导致人身伤亡。 |
Caterpillar Information System:
An Updated Troubleshooting Procedure for the Caterpillar Regeneration System Is Available{1050} An Updated Troubleshooting Procedure for the Caterpillar Regeneration System Is Available{1050}
C18 Power Module Winding - Test
3412, 3412C, and 3412E Generator Set Engines Fuel Rack Solenoid - Test
3512B Engine Instrument Panel
2008/09/08 Replace the Connecting Rod Bearings According to the Operation and Maintenance Manual {1219, 1225}
3500 Generator Sets Generator Load - Check
C4.4 Generator Set Engines Starting Aid (Glow Plug) Relay Circuit - Test
Troubleshooting a Loss of Combustion with the Aftertreatment Regeneration Device (ARD) {1088} Troubleshooting a Loss of Combustion with the Aftertreatment Regeneration Device (ARD) {1088}
2008/09/29 Procedure to Repair a Service Meter that Runs Constantly {1426, 4462}
3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect
Proper Plugging of the 315-1391 Crankshaft {1202} Proper Plugging of the 315-1391 Crankshaft {1202}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Telemetry Parameters
3500B Engines Auxiliary Water Pump - Disassemble - Auxiliary Pump (Type 2)
G3500J Engines Configuration Parameters
3512B Generator Set Engine Event Codes
3500B Engines Auxiliary Water Pump - Assemble - Auxiliary Pump (Type 2)
3412, 3412C, and 3412E Generator Set Engines Speed Control - Test
3512B Generator Set Engine Configuration Parameters
3412, 3412C, and 3412E Generator Set Engines Fuel Rack Position Sensor - Calibrate
Procedure for Powering the Battery Charger Continuously{751B} Procedure for Powering the Battery Charger Continuously{751B}
Clean Gas Induction (CGI) Line Upgrade{1061, 1087, 108N} Clean Gas Induction (CGI) Line Upgrade{1061, 1087, 108N}
3412, 3412C, and 3412E Generator Set Engines Speed Control (PWM) - Test
G3600 Engines Welding Precaution
2008/10/01 Diagnostic Code Occurring on C11 and C13 On-Highway Engines {1901, 1920}