Procedure to Repair a Service Meter that Runs Constantly {1426, 4462}
- Marine Engine:
- C15 MARINE (S/N: RLA1-UP)
- C18 MARINE (S/N: CKH1-UP; C1J1-UP)
- C32 MARINE (S/N: RNC1-UP)
The 197-8832 Service Meter Gp runs constantly when power is applied to the ECM.
The 300-5538 Wire contains a 1 kOhm, 2 Watt resistor. This wire can be installed in the Start/Stop control group if the engine is equipped with a 203-4624 Auto Start/Stop Control. The 300-5538 Wire and the connections for the Start/Stop control harness need to be sealed with heat shrink tubing. The 114-2505 Film can be applied to the service meter in order to provide the correction factor for the correct number of engine hours.
Show/hide table
 | |
| Illustration 1 | g01405231 |
Wiring schematic | |
Show/hide table
 | |
| Illustration 2 | g01391062 |
Wiring schematic (1) Apply heat shrink tubing to the connections of the Start/Stop control harness. | |
The new components are installed at the factory on the serial numbers that are listed in Table 1.
Show/hide table
| Effective serial numbers |
| S/N:C1J1088-UP |
| S/N:CKH3071-UP |
| S/N:RLA910-UP |
| S/N:RNC3073-UP |
Caterpillar Information System:
3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect
Proper Plugging of the 315-1391 Crankshaft {1202} Proper Plugging of the 315-1391 Crankshaft {1202}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Telemetry Parameters
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Troubleshooting
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Error Log - Access
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Sight Gauge - Clean
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Oil Level - Check
2008/09/15 A New Crankshaft Is Used {1202}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Oil - Change
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Flywheel - Clean
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Battery - Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Air Filter Element - Clean/Replace
Troubleshooting a Loss of Combustion with the Aftertreatment Regeneration Device (ARD) {1088} Troubleshooting a Loss of Combustion with the Aftertreatment Regeneration Device (ARD) {1088}
C4.4 Generator Set Engines Starting Aid (Glow Plug) Relay Circuit - Test
3500 Generator Sets Generator Load - Check
2008/09/08 Replace the Connecting Rod Bearings According to the Operation and Maintenance Manual {1219, 1225}
3512B Engine Instrument Panel
3412, 3412C, and 3412E Generator Set Engines Fuel Rack Solenoid - Test
C18 Power Module Winding - Test
An Updated Troubleshooting Procedure for the Caterpillar Regeneration System Is Available{1050} An Updated Troubleshooting Procedure for the Caterpillar Regeneration System Is Available{1050}
TH48-E70 Petroleum Transmission Safety Messages
3500B Engines Auxiliary Water Pump - Disassemble - Auxiliary Pump (Type 2)
G3500J Engines Configuration Parameters
3512B Generator Set Engine Event Codes