Replace the Connecting Rod Bearings According to the Operation and Maintenance Manual {1219, 1225}
- Engine:
- G3606 (S/N: 3XF1-UP; 4ZS1-UP)
- G3608 (S/N: BEN1-UP; 4WF1-UP)
- G3612 (S/N: BKE1-UP; 1YG1-UP)
- G3616 (S/N: 4CG1-UP; BLB1-UP)
Field evaluations and laboratory testing of G3600 connecting rod bearings indicate that carbon deposits can gradually form on the back side of the lower shell of the rod bearing. These deposits can reduce the heat transfer from the bearing to the rod. This can reduce the oil film thickness between the bearing and the crankshaft. In order to prevent bearing failure, the connecting rod bearings must be changed at the interval that is recommended in the Operation and Maintenance Manual. Failure to follow this recommendation could lead to bearing failure and damage to the crankshaft.
Table 1 lists the recommended service hour maintenance interval for replacing the connecting rod bearings.
Show/hide table
Recommended Service Hour Maintenance Interval     | ||
Fuel     | Compression Ratio     | Service Hours     |
Wellhead gas or natural gas     | 9.2:1     | 25000     |
Natural gas     | 10.5:1     | 15000     |
Bio-gas     | 9.2:1     | 10000 to 14000     |
Caterpillar Information System:
3500 Generator Sets Generator Load - Check
C4.4 Generator Set Engines Starting Aid (Glow Plug) Relay Circuit - Test
Troubleshooting a Loss of Combustion with the Aftertreatment Regeneration Device (ARD) {1088} Troubleshooting a Loss of Combustion with the Aftertreatment Regeneration Device (ARD) {1088}
2008/09/29 Procedure to Repair a Service Meter that Runs Constantly {1426, 4462}
3500 Generator Sets Engine Air Cleaner Service Indicator - Inspect
Proper Plugging of the 315-1391 Crankshaft {1202} Proper Plugging of the 315-1391 Crankshaft {1202}
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Telemetry Parameters
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Troubleshooting
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Error Log - Access
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Sight Gauge - Clean
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Oil Level - Check
2008/09/15 A New Crankshaft Is Used {1202}
3512B Engine Instrument Panel
3412, 3412C, and 3412E Generator Set Engines Fuel Rack Solenoid - Test
C18 Power Module Winding - Test
An Updated Troubleshooting Procedure for the Caterpillar Regeneration System Is Available{1050} An Updated Troubleshooting Procedure for the Caterpillar Regeneration System Is Available{1050}
TH48-E70 Petroleum Transmission Safety Messages
3500B Engines Auxiliary Water Pump - Disassemble - Auxiliary Pump (Type 2)
G3500J Engines Configuration Parameters
3512B Generator Set Engine Event Codes
3500B Engines Auxiliary Water Pump - Assemble - Auxiliary Pump (Type 2)
3412, 3412C, and 3412E Generator Set Engines Speed Control - Test
3512B Generator Set Engine Configuration Parameters
3412, 3412C, and 3412E Generator Set Engines Fuel Rack Position Sensor - Calibrate