Fuel Priming Pump - Disassemble
Start By:
- Remove the fuel priming pump and primary filter (water separator).
- Remove plug (1) and the O-ring seal.
- Remove adapter (2) and the O-ring seal.
- Remove adapter (3) and the O-ring seal. Remove screw (4).
Show/hide table
Illustration 2 g06375755 - Remove plugs (5) and the O-ring seals.
Show/hide table
Illustration 3 g06375765 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Remove plug (6), O-ring seal (8), spring (9), check valve (10), and O-ring seal (7). Repeat for the other plug.
Show/hide table
Illustration 4 g06375766 - Remove bolts (11) and cap (12). Remove the O-ring seal from cap (12).
Show/hide table
Illustration 5 g06375769 - Remove nuts (13) and harness assemblies (14). Remove the O-ring seals from harness assemblies (14).
Show/hide table
Illustration 6 g06375771 - Remove pump assembly (17) from the housing assembly.
- Remove seal (15), back up ring (18), seal (16), and backup ring (19) from pump assembly (17).
Show/hide table
Illustration 1 | g06375750 |
Caterpillar Information System:
C7.1 Engines and Generator Sets Diagnostic Trouble Codes
C7.1 Engines and Generator Sets Configuration Parameters
C7.1 Engines and Generator Sets Electrical Connectors
C7.1 Engines and Generator Sets Diagnostic Capabilities
C7.1 Engines and Generator Sets Diesel Particulate Filter Regeneration
C4.4 (Mech) Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install - Type 2 Exhaust Manifold
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Water Temperature Regulator - Remove and Install
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Valve Mechanism Cover - Remove and Install
980L Medium Wheel Loaders Event Codes
980L Medium Wheel Loaders Diagnostic Trouble Codes
980L Medium Wheel Loaders Diagnostic Capabilities
High-Speed Transfer Drive Retaining Ring Failure on Certain Compact Wheel Loaders {3159, 4350, 4355} High-Speed Transfer Drive Retaining Ring Failure on Certain Compact Wheel Loaders {3159, 4350, 4355}
980L Tier 3 Wheel Loader Engine Supplement Fuel Priming Pump - Assemble
992K Wheel Loader Systems Piston Pump (Steering)
992K Wheel Loader Systems Hydraulic Tank (Steering, Brake)
New Pinion Bevel Gear Set Is Now Used on the 950 GC Medium Wheel Loader {3254, 3256, 3258} New Pinion Bevel Gear Set Is Now Used on the 950 GC Medium Wheel Loader {3254, 3256, 3258}
980L Medium Wheel Loaders Steering System
D6N Track-Type Tractor Monitoring System Operator Menu
980L Medium Wheel Loaders Torque Converter Lockup Clutch Does Not Engage
980L Tier 3 Wheel Loader Machine System Bucket - Remove and Install
980L Medium Wheel Loaders Transmission Clutch Slips
D6K and D6K2 Track-Type Tractor Monitoring System Service Menu
3500E Marine Engines Overhaul Recommendations
Improved Retention Method For The Headliner Of Certain PL61 Pipelayers {7301} Improved Retention Method For The Headliner Of Certain PL61 Pipelayers {7301}