Fuel Priming Pump - Assemble
- Install backup ring (19), seal (16), backup ring (18), and seal (15) onto pump assembly (17).
- Install pump assembly (17) to the housing assembly.
Show/hide table
Illustration 2 g06375769 - Install the O-ring seals onto harness assemblies (14). Install harness assemblies (14) and nuts (13). Tighten nuts (13) to a torque of
1.7 ± 0.4 N.m (15.0 ± 3.5 lb in) .Show/hide tableIllustration 3 g06375766 - Install the O-ring seal to cap (12). Install cap (12) and bolts (11). Tighten bolts (11) to a torque of
6.00 ± 0.75 N.m (53.10 ± 6.64 lb in) .Show/hide tableIllustration 4 g06375765 Show/hide tableImproper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install O-ring seal (7), check valve (10), spring (9), O-ring seal (8), and plug (6). Tighten plug (6) to a torque of
95 ± 10 N·m (70 ± 7 lb ft) . Repeat for the other plug.Show/hide tableIllustration 5 g06375755 - Install the O-ring seals and plugs (5).
Show/hide table
Illustration 6 g06375750 - Install screw (4). Tighten screw (4) to a torque of
4.5 ± 0.5 N.m (39.8 ± 4.4 lb in) . - Install the O-ring seal and adapter (2).
- Install the O-ring seal and adapter (3).
- Install the O-ring seal and plug (1). Tighten plug (1) to a torque of
11 ± 2 N.m (97 ± 18 lb in) .
Show/hide table
Illustration 1 | g06375771 |
End By:
- Install the fuel priming pump and primary filter (water separator).
Caterpillar Information System:
980L Tier 3 Wheel Loader Engine Supplement Fuel Priming Pump - Disassemble
C7.1 Engines and Generator Sets Diagnostic Trouble Codes
C7.1 Engines and Generator Sets Configuration Parameters
C7.1 Engines and Generator Sets Electrical Connectors
C7.1 Engines and Generator Sets Diagnostic Capabilities
C7.1 Engines and Generator Sets Diesel Particulate Filter Regeneration
C4.4 (Mech) Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install - Type 2 Exhaust Manifold
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Water Temperature Regulator - Remove and Install
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Valve Mechanism Cover - Remove and Install
980L Medium Wheel Loaders Event Codes
980L Medium Wheel Loaders Diagnostic Trouble Codes
980L Medium Wheel Loaders Diagnostic Capabilities
992K Wheel Loader Systems Piston Pump (Steering)
992K Wheel Loader Systems Hydraulic Tank (Steering, Brake)
New Pinion Bevel Gear Set Is Now Used on the 950 GC Medium Wheel Loader {3254, 3256, 3258} New Pinion Bevel Gear Set Is Now Used on the 950 GC Medium Wheel Loader {3254, 3256, 3258}
980L Medium Wheel Loaders Steering System
D6N Track-Type Tractor Monitoring System Operator Menu
980L Medium Wheel Loaders Torque Converter Lockup Clutch Does Not Engage
980L Tier 3 Wheel Loader Machine System Bucket - Remove and Install
980L Medium Wheel Loaders Transmission Clutch Slips
D6K and D6K2 Track-Type Tractor Monitoring System Service Menu
3500E Marine Engines Overhaul Recommendations
Improved Retention Method For The Headliner Of Certain PL61 Pipelayers {7301} Improved Retention Method For The Headliner Of Certain PL61 Pipelayers {7301}
Installation Procedure for the TLV2 Seat Suspension Harness {1408, 7324} Installation Procedure for the TLV2 Seat Suspension Harness {1408, 7324}