Expansion Tank - Remove and Install
拆卸步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将冷却液从冷却系统中排入合适的容器,以便保存或弃置。 请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
- 断开软管 (1) 。
Show/hide table
图 1 | g01390905 |
- 断开软管 (3) 、 (4) 和 (6) 。
Show/hide table
图 2 | g01390907 |
- 断开线束组件 (5) 。
- 拆下 (2) 和膨胀水箱 (7) 。
安装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 安放膨胀水箱 (7) 到位,安装螺栓 (2) 。
Show/hide table
图 3 | g01390907 |
- 连接线束组件 (5) 。
- 连接软管 (6) 、 (4) 和 (3) 。
- 连接软管 (1) 。
Show/hide table
图 4 | g01390905 |
- 加注膨胀水箱至正确液位。 请参阅操作和保养手册, "冷却系统冷却液 - 更换"。
Caterpillar Information System:
3512C Industrial Engine Flywheel Housing - Install
Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030} Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030}
3512C Industrial Engine Accessory Drive (Front) - Remove
3512C Industrial Engine Alternator - Remove and Install
3512C Industrial Engine Cylinder Head - Remove
C15 and C18 Generator Set Engines Fuel Cooler - Remove and Install
G3500 A3 Engines Engine Coolant Temperature (High)
2007/06/25 New Pressure Sensors are Used {1000, 1408, 1900}
Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119} Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119}
3512C Industrial Engine Flywheel - Remove and Install
C4.4 (Mech) Industrial Engine Engine Valve Lash - Inspect/Adjust
C18 Industrial Engines Aftercooler Core - Clean/Test - Air-To-Air Aftercooler (If Equipped)
G3500 A3 Engines Turbocharger
G3500 A3 Engines Exhaust Manifold - Water cooled
G3508, G3512 and G3516 Engines Nitrogen Oxide Sensor - Remove and Install
2007/07/02 A New Spark Plug is Available {1550, 1555}
G3300 Engines Product Storage
C7 Petroleum Engine Speed Sensor - Clean/Inspect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Sample (Level 2) - Obtain
C15 Petroleum Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Governor - Adjust
C6.6 Industrial Engine Refill Capacities and Recommendations
C7.1 (Mech) Industrial Engine Alternator - Inspect