G3300 Engines Caterpillar


Product Storage

Usage:

G3306 07Y
Če motorja več tednov ne boste zagnali, lahko mazalno olje izteče iz ohišja valjev in iz batnih obročkov. Na površini valjnih puš se lahko pojavi rja, zaradi česar se poveča obraba motorja, kar lahko skrajša njegovo življenjsko dobo.

Upoštevajte naslednje postopke in preprečite prekomerno obrabo motorja:

  • Opravite vse priporočene postopke podmazovanja, ki so navedeni v teh Navodilih za uporabo in vzdrževanje, "Razpored intervalov vzdrževanja" (poglavje Vzdrževanje).

  • Če pričakujete zelo nizke temperature, preverite, ali hladilni sistem nudi ustrezno zaščito pred zamrzovanjem. Glejte Posebno publikacijo, SEBU6400, "Caterpillar Gas Engine Lubricant, Fuel, and Coolant Recommendations".

Če motor ne deluje in ga ne nameravate uporabljati, morate izvesti posebne ukrepe. Če bo motor skladiščen dlje kot en mesec, je priporočena izvedba celotnega zaščitnega postopka.

Pri prodajalcu družbe Caterpillar so na voljo navodila za pripravo motorja na daljša obdobja skladiščenja.

Če želite več informacij o skladiščenju motorja, glejte Posebna navodila, SEHS9031, "Storage Procedure for Caterpillar Products".

Skladiščenje generatorja

Če želite več informacij o skladiščenju generatorja, glejte dokumentacijo, ki jo je zagotovil proizvajalec generatorja. Obrnite se na prodajalca družbe Caterpillar.

Caterpillar Information System:

2007/07/02 A New Spark Plug is Available {1550, 1555}
G3508, G3512 and G3516 Engines Nitrogen Oxide Sensor - Remove and Install
G3500 A3 Engines Exhaust Manifold - Water cooled
G3500 A3 Engines Turbocharger
C15 and C18 Generator Set Engines Expansion Tank - Remove and Install
3512C Industrial Engine Flywheel Housing - Install
Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030} Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030}
3512C Industrial Engine Accessory Drive (Front) - Remove
3512C Industrial Engine Alternator - Remove and Install
3512C Industrial Engine Cylinder Head - Remove
C15 and C18 Generator Set Engines Fuel Cooler - Remove and Install
G3500 A3 Engines Engine Coolant Temperature (High)
C7 Petroleum Engine Speed Sensor - Clean/Inspect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Sample (Level 2) - Obtain
C15 Petroleum Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Governor - Adjust
C6.6 Industrial Engine Refill Capacities and Recommendations
C7.1 (Mech) Industrial Engine Alternator - Inspect
G3500 A3 Engines Fuel Energy Content
3176C, 3406E and 3456 Industrial Engines Engine Has Mechanical Noise (Knock)
C6.6 Industrial Engine Engine Oil and Filter - Change
C9 Marine Generator Set Starting the Engine - Marine Certification Society (MCS) Control Panel
C15 and C18 Generator Set Engines Radiator Bottom Tank - Remove and Install - Jacket Water Heater
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.