Accessory Drive (Front) - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud
1/2 - 13 NC by 4 inches |
2 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove the alternator pulley (if equipped).
Show/hide table
Illustration 1 g01054400 - Remove bolts (1) in order to remove rear cover (2) from rear adapter assembly (3).
- Remove bolts (4) from rear adapter assembly (3). Use Tooling (A) to remove rear adapter assembly (3).
Show/hide table
Illustration 2 g00906510 - Remove the bolts in order to remove the front cover (not shown).
- Remove bolts (5). Remove front adapter assembly (6), the shaft, and the drive gear as a unit from the drive housing.
Caterpillar Information System:
3512C Industrial Engine Alternator - Remove and Install
3512C Industrial Engine Cylinder Head - Remove
C15 and C18 Generator Set Engines Fuel Cooler - Remove and Install
G3500 A3 Engines Engine Coolant Temperature (High)
2007/06/25 New Pressure Sensors are Used {1000, 1408, 1900}
Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119} Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119}
3512C Industrial Engine Flywheel - Remove and Install
C4.4 (Mech) Industrial Engine Engine Valve Lash - Inspect/Adjust
C18 Industrial Engines Aftercooler Core - Clean/Test - Air-To-Air Aftercooler (If Equipped)
C9 Engine Safety Messages
Fluid Power and Electrical Graphic Symbols Electrical Power Graphic Symbols
3176C, 3406E and 3456 Industrial Engines Electronic Service Tools
Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030} Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030}
3512C Industrial Engine Flywheel Housing - Install
C15 and C18 Generator Set Engines Expansion Tank - Remove and Install
G3500 A3 Engines Turbocharger
G3500 A3 Engines Exhaust Manifold - Water cooled
G3508, G3512 and G3516 Engines Nitrogen Oxide Sensor - Remove and Install
2007/07/02 A New Spark Plug is Available {1550, 1555}
G3300 Engines Product Storage
C7 Petroleum Engine Speed Sensor - Clean/Inspect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Sample (Level 2) - Obtain
C15 Petroleum Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C4.4 Industrial Engine Fuel Related Components in Cold Weather