Exhaust Manifold - Water cooled
Show/hide table
Illustration 1 | g01391864 |
Top view |
Note: Apply 5P-3931 Anti-Seize Compound on the following items on the exhaust manifold:
- Threads of bolts
- Plugs
- Studs
- Nuts
(1) Clamp
- Torque ...
14.0 ± 1.5 N·m (10 ± 1 lb ft)
(2) Nut
- Simultaneously tighten the diagonally opposite nuts to the following torque. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
(3) Taperlock stud
- Torque ...
35 ± 5 N·m (26 ± 4 lb ft)
(4) Nut
- Simultaneously tighten the diagonally opposite nuts to the following torque. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
(5) Nut
- Simultaneously tighten the diagonally opposite nuts to the following torque. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
(6) Taperlock stud
- Torque ...
35 ± 5 N·m (26 ± 4 lb ft)
(7) Nut
- Simultaneously tighten the diagonally opposite nuts to the following torque. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
55 ± 5 N·m (41 ± 4 lb ft) - Tighten the nuts to the following torque again. ...
Show/hide table
Illustration 2 | g01391865 |
Right side view |
(8) Taperlock stud
- Torque ...
35 ± 5 N·m (26 ± 4 lb ft)
(9) Nut
- Torque ...
55 ± 5 N·m (41 ± 4 lb ft)
(10) Nut
- Torque ...
55 ± 5 N·m (41 ± 4 lb ft)
Show/hide table
Illustration 3 | g01391868 |
View C-C |
(11) Nut
- Torque ...
55 ± 5 N·m (41 ± 4 lb ft)
Show/hide table
Illustration 4 | g01391867 |
Rear view |
(12) Nut
- Torque ...
55 ± 5 N·m (41 ± 4 lb ft)
Caterpillar Information System:
G3500 A3 Engines Turbocharger
C15 and C18 Generator Set Engines Expansion Tank - Remove and Install
3512C Industrial Engine Flywheel Housing - Install
Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030} Bench Test Procedure For A TH31-E61 Oil/Gas Transmission With A Drop Box {3030}
3512C Industrial Engine Accessory Drive (Front) - Remove
3512C Industrial Engine Alternator - Remove and Install
3512C Industrial Engine Cylinder Head - Remove
C15 and C18 Generator Set Engines Fuel Cooler - Remove and Install
G3500 A3 Engines Engine Coolant Temperature (High)
2007/06/25 New Pressure Sensors are Used {1000, 1408, 1900}
Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119} Missing Pipe Plugs on the C-10, C-12, C-15, C15, and C-16 Engines Jake Brake{1119}
3512C Industrial Engine Flywheel - Remove and Install
G3508, G3512 and G3516 Engines Nitrogen Oxide Sensor - Remove and Install
2007/07/02 A New Spark Plug is Available {1550, 1555}
G3300 Engines Product Storage
C7 Petroleum Engine Speed Sensor - Clean/Inspect
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Cooling System Coolant Sample (Level 2) - Obtain
C15 Petroleum Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
C4.4 Industrial Engine Fuel Related Components in Cold Weather
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines Governor - Adjust
C6.6 Industrial Engine Refill Capacities and Recommendations
C7.1 (Mech) Industrial Engine Alternator - Inspect
G3500 A3 Engines Fuel Energy Content
3176C, 3406E and 3456 Industrial Engines Engine Has Mechanical Noise (Knock)