Rocker Arm and Shaft - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A.     | 8T-2998     | 润滑剂     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 在推杆两端涂抹工具 (A) 。
- 在各个摇臂底面上涂抹工具 (A) 。
- 安装推杆 (7) 。
Show/hide table
图 1 | g01943645 |
Show/hide table
图 2 | g02150968 |
Show/hide table
图 3 | g02151190 |
视图显示了双头螺栓 (2) 的位置。 |
- 将摇臂轴组件对准定位销 (X) 。 放置摇臂轴组件,然后安装螺栓 (8) 和双头螺栓 (2) 。
- 放置摇臂调整螺钉 (5) ,然后拧紧螺母 (6) 。 调整摇臂的气门间隙。 请参阅测试和调整, "发动机气门间隙 - 检查/调整"。
- 放置线束组件 (3) 。 固定在双头螺栓 (2) ,然后安装螺母 (1) 。
Show/hide table
图 4 | g02150943 |
Show/hide table
图 5 | g02151213 |
- 连接线束组件 (4) ,然后小心地将锁紧弹簧 (Z) 放置入位。
End By: 安装气门机构盖。 请参阅 拆解和组装, "气门机构盖 - 拆卸和安装"。
Caterpillar Information System:
G3516B and G3520B Generator Set Engines Engine Oil Pan - Remove
2007/02/01 Retirement of the Paper Version of Truck Engine News {1000}
CX35 On-Highway Transmission Transmission Planetary - Assemble
C9 On-highway Engine Rocker Arm and Shaft - Remove
C7 and C9 On-Highway Engines Engine Monitoring Lamp Parameters
C9 On-highway Engine Valve Mechanism Cover - Remove and Install
3508C, 3512C and 3516C Marine Engines Water Pump - Remove
2007/02/01 New Improved Air Lines for Air Compressors Are Now Used {5502}
2009/10/05 New Improved Air Lines for Air Compressors Are Now Used on C15 and C18 Industrial Engines {5502}
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
C9 On-highway Engine Valve Mechanism Cover
Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722} Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722}
G3516B and G3520B Generator Set Engines Engine Oil Pan - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines 5 Volt Sensor Supply Circuit - Test
G3516B and G3520B Generator Set Engines Electric Starting Motor - Remove and Install
3508C, 3512C and 3516C Marine Engines Water Pump - Install
3512B and 3516B High Displacement Locomotive Engines Maintenance Recommendations
C9 On-highway Engine Unit Injector - Install
G3520C and G3520E Engines Valve Mechanism
2007/04/09 A New Fan Pulley Group is Used {1359}
C9 On-highway Engine Unit Injector - Remove
3500C Marine Auxiliary Engines Boost Pressure Is High
C15 and C18 Industrial Engines Flywheel Housing
C4.4 (Mech) Industrial Engine Fuel Tank Water and Sediment - Drain