Boost Pressure Is High
使用本步骤以诊断和排除增压压力高故障,或者在下列任一事件代码为激活状态时使用本步骤。 有关事件代码和这些代码的默认触发点的信息,请参阅故障诊断与排除, "事件代码"。 必须进入 Caterpillar ET(Electronic Technician,电子技师)的监控系统才能查看这些代码的当前触发点。
Show/hide table
事件代码     | ||
---|---|---|
代码和描述     | 产生此代码的默认状况     | 系统响应     |
E162(1) 增压压力高     | 增压压力高于增压压力高触发点。     | 将会记录该代码。     |
E162(2) 增压压力高     | 将会记录该代码。 发动机功率降低。 |
可能原因
- 发动机负载过高
建议的措施
发动机负载过高
降低发动机负载。
Caterpillar Information System:
C9 On-highway Engine Unit Injector - Remove
2007/04/09 A New Fan Pulley Group is Used {1359}
G3520C and G3520E Engines Valve Mechanism
C9 On-highway Engine Unit Injector - Install
3512B and 3516B High Displacement Locomotive Engines Maintenance Recommendations
3508C, 3512C and 3516C Marine Engines Water Pump - Install
G3516B and G3520B Generator Set Engines Electric Starting Motor - Remove and Install
C4.4 and C6.6 Engines for Caterpillar Built Machines 5 Volt Sensor Supply Circuit - Test
G3516B and G3520B Generator Set Engines Engine Oil Pan - Install
C9.3 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
G3516B and G3520B Generator Set Engines Engine Oil Pan - Remove
2007/02/01 Retirement of the Paper Version of Truck Engine News {1000}
C15 and C18 Industrial Engines Flywheel Housing
C4.4 (Mech) Industrial Engine Fuel Tank Water and Sediment - Drain
2007/03/12 Turbochargers {1052}
3500C Marine Auxiliary Engines Fuel Pressure Is Low
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Disassemble
3500C Marine Auxiliary Engines Engine Cranks but Does Not Start
C9.3 Engine for Caterpillar Built Machines Water Pump
3500C Marine Auxiliary Engines Coolant Level - Test
3500C Marine Auxiliary Engines Protection Override - Test
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Assemble
C15 and C18 Petrolem Generator Set Engines Valve Lash Is Excessive
C18 Marine Auxiliary Engines Oil Pressure Is Low