Engine Oil Pan - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Drain the oil from the engine into a suitable container for storage or disposal.
Show/hide table
Illustration 1 g00760917 - Remove bolts (1) that hold adapter (2) of the engine oil pump to the engine oil pan.
Show/hide table
Illustration 2 g00760918 - Remove bolts (4) that hold hose assembly (3) in the oil pan.
Show/hide table
Illustration 3 g00760919 - Remove bolts (5) that hold oil pan (6) to the engine.
- Lift the engine off the engine oil pan. The weight of the engine is approximately
14666 kg (32335 lb) . - The weight of the engine assembly is approximately
15059 kg (33200 lb) . - The weight of the engine oil pan is approximately
393 kg (865 lb) .
Caterpillar Information System:
2007/02/01 Retirement of the Paper Version of Truck Engine News {1000}
CX35 On-Highway Transmission Transmission Planetary - Assemble
C9 On-highway Engine Rocker Arm and Shaft - Remove
C7 and C9 On-Highway Engines Engine Monitoring Lamp Parameters
C9 On-highway Engine Valve Mechanism Cover - Remove and Install
3508C, 3512C and 3516C Marine Engines Water Pump - Remove
2007/02/01 New Improved Air Lines for Air Compressors Are Now Used {5502}
2009/10/05 New Improved Air Lines for Air Compressors Are Now Used on C15 and C18 Industrial Engines {5502}
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
C9 On-highway Engine Valve Mechanism Cover
Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722} Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722}
C4.4 (Mech) Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C9.3 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
G3516B and G3520B Generator Set Engines Engine Oil Pan - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines 5 Volt Sensor Supply Circuit - Test
G3516B and G3520B Generator Set Engines Electric Starting Motor - Remove and Install
3508C, 3512C and 3516C Marine Engines Water Pump - Install
3512B and 3516B High Displacement Locomotive Engines Maintenance Recommendations
C9 On-highway Engine Unit Injector - Install
G3520C and G3520E Engines Valve Mechanism
2007/04/09 A New Fan Pulley Group is Used {1359}
C9 On-highway Engine Unit Injector - Remove
3500C Marine Auxiliary Engines Boost Pressure Is High
C15 and C18 Industrial Engines Flywheel Housing